Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: Polymaker Black Transmission Distance: 0.5 Polymaker Blue Transmission Distance: 2 Polymaker Yellow Transmission Distance: 8 Polymaker White Transmission Distance: 6

Swap Instructions: Black until layer #9 at 0.8mms Blue until layer #12 at 1.04mms Yellow until layer #20 at 1.68mms White until layer #24 at 2mms

(Filament transmission distances approximated)

For additional help, check out the #filament-painting channel in the Polymaker Discord