Snapmaker Bucket Head Connector
109 downloads · 4 years ago · Does your Snapmaker need the 𝕤𝕦𝕔𝕔 but you're a cheapskate? Well, get your butt down to the Home
This model is restricted by licensing terms.
View license.
Does your Snapmaker need the 𝕤𝕦𝕔𝕔 but you're a cheapskate? Well, get your butt down to the Home Depot and 𝕤𝕦𝕔𝕔 on a budget.
Print one of each adapter part, drill a 1in (26mm) hole in your Snapmaker's enclosure, screw the adapter in, and attach the 𝕤𝕦𝕔𝕔. The other end is sized for a CPAP hose to connect to this 3D printed dust shoe.
To keep your hose from getting tangled (happens to every gentleman sooner or later) print the clips and use spare screws to nail that bastard to one of the Z axis actuators.
Snapmaker Bucket Head Connector
109 downloads · 4 years ago in and
This model is restricted by licensing terms.
View license.
Not So XL Rudolph
XL Rudolph
Not So XL Grinch Collection… Inspired Fan Art
Not So XL Grinch
XL Grinch
Not So.. XL Highland Cow (standing) for smaller build plates below 300x300x300
XL Highland Cow (standing) for larger build plates above 300x300x300
XL Max... inspired fan art.
Mrs Easter Bunny Not So.. XL, for smaller build plates below 300x300x300
Mrs Easter Bunny XL, for larger build plates above 300x300x300
Not So XL Easter Bunny - for smaller build plates
XL Easter Bunny - for larger build plates
Not So XL Urban Goose, for smaller build plates below 300x300x300
XL Urban Goose, for larger build plates above 320x320x320
Not So XL Leprechaun (for smaller build plates below 300 by 300 by 300)
Not So XL Gingerbread Man
XL Gingerbread Man
NOT SO… XL APRILS SHOWERS GOOSE
XL Summer Goose
