Let me guess. You have a closet full of 3D printers. It's got a clothes hanger bar, but you don't have clothes, because who needs to go outside when you have a closet 3D printers?

Put that storage space to use with this hanger! See it in action in this video: [put video here]

You'll need at least two hangers, ideally one each foot or so. For each, print:

• 1x Hanger Hook
• 1x Hanger Hub
• 2x Long Bar
• 1x Short Bar
• 1x Hanger Corner
• 1x Hanger Corner (mirrored)

You'll also want a pile of Wheels, ideally in multiples of four.

You'll also need:

• 8mm metal rod, long as you want, cheapest you can find
• 4x 12mm M3 screws and M3 nuts per hanger
• A pile of 608 bearings, ideally in multiples of 4

Instructions!

• Glue everything but the hook and wheels together
• Mount the Hook on one side with an M3 screw and nut
• Insert an M3 screw into one or two pockets on each side, add the screws, don't tighten too far
• Shove bearings into wheels
• Thread wheels and hangers onto rods as desired
• Tighten screws
• Hook over bar, add screw to secure hook
• Put filament on wheels
• Print