These cuties come with a version with a bow, and one without!! They're super wiggly and super cute <3 8/14/25: Tail is no longer separate.

Recommended Print Settings:

Layer Height: .16

Infill: 15%

Supports: Not needed

Adaptive Layer Height recommended (but will slow print down)

Slow down first five layers as this print includes ball joints that require extra adherence to the build plate. Make sure your first layers stick adequately!

Pro Tip: If the first layers struggle to stick, try slowing down your first layers or increasing the bed temp slightly.

Tested down to 70%

Hi there! I'm Mouse and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :)

If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D

Please do not share digital files! Thank you.

Please be warned that these models are not toys and not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk!