CYBER CLAWS... NOW WITH MINI BOXER GLOVES!!!!!

With fast action and faster assembly thanks to it's well designed print-in-place mechanism.

With 3 pre-sized plates, and a completely scalable design you can print a set for the kids - and even the BIGGEST kids! BUT DON'T POKE AN EYE OUT.

To print this model:

1. Ensure you do not have supports turned on for the mechanism objects.

2. The mechanisms come off the plate stiff, but only take a quick crack to free the joints. To release joints squeeze the opposite corners while wrapped in a cloth to avoid a pinched finger.

3. With all joints free-moving, rapidly move each joint in the mechanisms to work it in, moving back and forth for the full range, and apply a slight twist pressure. This warms up the internal surfaces and cleans up bits that may cause unwanted friction.

4. Before adding the blades - use the tab on the blade to pop out supports inside the blade slot.