Doing a small drywall patch? Ran out of mesh tape and you just have a few seams to go? Boy have I got the 3D printed compromise for you!

This is a 50x200mm piece of drywall mesh "tape". Tape being in quotes here because it has no adhesive like proper mesh tape, obviously. This stuff is quite fragile compared to proper mesh tape, so I can't suggest using this on your construction site, but if you kicked another hole in the wall because you got destroyed by a child in Call of Duty and you need to patch it up before mom gets home this might just be the product for you.

PRINT SETTINGS:

• You must use a .4mm nozzle or smaller or the slicer will not resolve the lines. The lines themselves are .5mm wide and .4mm tall.
• Slow your print speeds way down. I've been using 25mm/s across the board and these still only take like 6 minutes to print.
• I used PETG for all of my tests for the flexibility as opposed to PLA.
• BED LEVELING must be on point. If your bed isn't level there is no way this fragile print will come out right.