It's our favorite sweet bun turtle....but now a baby and is clicky,

UPDATE - I changed the top piece to fit better and make clicking smoother. I updated the .3mf and uploaded a second top. Both are saved as V2. Only the top was affected and not the turtle itself.

Please make sure you have a clean bed and good adhesion.

Slow that initial layer down to 25 along with the initial layer infill. The 3mf is already set to the slow beginning speeds, but those of you who do not use the 3mf, slow down that first layer. Can you run it faster....yes...the odds of it messing up will increase.

*- DO NOT change the size of this turtle! * If you are having issues with the top being too loose or tight. You can increase or decrease the size by .05%.

I do not recommend using matte or silk for the top piece unless it is an accent color - These two filaments were softer and the top does not stay in as well and you may need to add a tiny dab of glue to get the top to stay on.

The two brands of keyboard switches I used were Kailh and Gateron. The Gaterons are silent.

https://a.co/d/4vmW5Jk - Kailh Switches

https://a.co/d/eXLILuI - Gateron Switches

Painted 3mf included. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes.

Printing recommendations: Initial layer and initial layer infill Speed - 25  .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints

Filaments: Polyterra - Cappucino Esun PLA+ - Black Esun PLA+ - Cold White Esun Silk PLA - Orange

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.