Painted 3mf included. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes.

Printing recommendations: First Layer and Initial Layer infill speed 25 .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints

Reduce acceleration and adjust overhang speeds as needed - Change the outwall acceleration to half of the speed - The 3mf is set to 2000 mm/s for outer walls

Filaments: Protopasta - Moonstruck White Satin Protopasta - Always Sunny Yellow Protopasta - Luke's Proton Purple Protopasta - Wonderblack Rainbow Glitter Protopasta - Luke's Proton Purple Protopasta - Galatic Empire Metallic Purple

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning:

NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.