Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6113053.

We hope this fun lamp design brightens your day!

3 lamp shades provided for your enjoyment and to demonstrate what's possible.

Design your own lampshade following this tutorial: https://youtu.be/MGb4gvUI7M0

Lampshades are 3D printed with Protopasta's Bottle Brown, Cobalt Blue, and Soda Green Translucent HTPLA filaments available at http://www.protopasta.com. For sturdy, but still translucent shades, we recommend the following settings:

extrusion width: 0.9 mm layer height: 0.4 mm speed: 20 mm/s

We print with no slowdowns using spiralize (vase) mode for a continuous extrusion with no start/stop defects.

The base can be printed with typical settings like:

extrusion width: 0.42-0.63 mm layer height: 0.15-0.25 mm speed: 20-30 mm/s 2-3 walls 4+ top/bottom and infill for support

We recommend printing upside down.

Here is a link to fixture used for lamp: https://a.co/d/aUivaHm

We used a standard LED bulb. Be careful not to select a hot bulb that melts that plastic. Consider a dimmable bulb to adjust the light level to your preference.

Design commissioned and inspired by June's Endless Pastabilities Filament Subscription. Subscribe to support future designs and get 3 new Protopasta colors every 2 months: https://www.proto-pasta.com/products/endless-pastabilities

More about Protopasta x CM Design Collaboration at Protopasta.com/blog

Enjoy creating your own lamp! Can't wait to see what you make!!!

All our best,

Alex and the Protopasta Team