ProjectPrintLab
ProjectPrintLab
|
Image 1 of 5
IKEA Skadis Domsanistor Vacuum Holder 3d model
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 5
IKEA Skadis Domsanistor Vacuum Holder 3d model
IKEA Skadis Domsanistor Vacuum Holder 3d model
IKEA Skadis Domsanistor Vacuum Holder 3d model
IKEA Skadis Domsanistor Vacuum Holder 3d model
IKEA Skadis Domsanistor Vacuum Holder 3d model
IKEA Skadis Domsanistor Vacuum Holder 3d model

IKEA Skadis Domsanistor Vacuum Holder

This model is restricted by licensing terms. 

This is a holder for the Domsanistor Handheld Vacuum Sealer Machine for the IKEA Skadis/SKÅDIS pegboard. The vacuum sealer is used to seal Reusable Sous Vide bags. I use these bags to keep my filament dry.

The vacuum is mounted upside down in the holder due to the taper in the body of the vacuum. There is a 20mm hole in the bottom of the holder to allow for activation of the vacuum while in the holder if need be.

This model has a 50% grid infill for sturdiness and is printed with 3 small tree supports under the tabs that are used for mounting on the pegboard.

*Affiliate links used above.


Discussions

IKEA Skadis Domsanistor Vacuum Holder

15 downloads · 2 years ago in 
This model is restricted by licensing terms.