Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION💘⚔️

Hi Friends! I'm back with a slightly different spin on our valentine's heart clicker! When brainstorming ideas for valentines, both Nick and I thought of a heart with wings! To add a little extra fidgeting fun to our fidget clickers, we thought it would be extra fun to make the wings flexible! Along the valentines theme, we had to add an arrow and as faces have kind of become our style, we knew we needed to offer some cute faces to heart cap library! The best part? The caps and bases are the same size as those for our conversation clickers so the caps can be interchanged! I'm super happy with how these turned out and hope you love them! 💘⚔️

⚠️NOTE: The larger keychain option was a tight fit and there may be a small intersecting hole on the inside of the clicker base. This was done to maximize the strength of the wall that holds the keychain and will not impact the form, fit or function of the clicker!⚠️

This pack contains 4 unique base shapes and 5 unique caps. Raised variants are offered where able. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Red - CookieCad Ruby Red Elixir
• Pink - PolyTerra Candy
• Gold - Amolen PLA Shiny Gold

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Pupils)
• Medium Detail (Eyes, Mouth)
• Everything Else (Base Colors)

I've also found hitting the print with a heat gun right before the main body color starts printing will eliminate any little strings that can cause blemishes on the final design. (flat designs ONLY)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com