Introducing the Infiltrator!

I decided to make this the my first model in 1/32 scale.It can easily be scaled to 1/24 or 1/48 scale, though.

The length in 1/32 scale is 538.72 mm (21.21 in)

Features Full Cockpit interior. Room for engine LEDs and cable routing. The ship has a recess for an M6 / 1/4" nut on the bottom to mount it on display stands. M6 Nuts: https://amzn.to/4bssePw 1/4" Nuts: https://amzn.to/3NKifv2 Ball Joint Display Stand: https://amzn.to/4kovj58

Pre-supported STL files and Lychee Slicer Scenes for resin printing are included.

Happy printing and building everyone!

Info All files are optimized for resin printing. Min. required printer build volume: 192x120x215 mm (WxDxH)

Print the wings and the fuselage with engineering resin (or similar that has little to no flex) to prevent any sagging. Don’t use an ABS-like resin. Cure the wings and the fuselage very thoroughly immediately after printing for at least 20-30 minutes (washed of course).

My resin recommendation: https://amzn.to/454ywQd

If you still need a good slicer for resin printing, I recommend Lychee Slicer: https://lychee.co/pricing-and-subscription?utm_source=affiliae&utm_campaign=lychee&utm_medium=NerdMaker&ae=55 *

Join the NerdMaker Community YouTube Twitch Discord Instagram Facebook

License A Commercial License, to sell 3D-Prints of my Models, is available here: Patreon

All amzn.to links are Amazon Affiliate links. As an Amazon Associate I earn from qualifying purchases. The price will stay the same for you of course! *This is an affiliate link. If you purchase the Plus or Library license via this link, I get a small commission from Lychee. The price will stay the same for you of course!