Half Fix Point Holes are smaller than Regular Fix Point Holes and can fit on smaller parts. They only work with Half Fix Points.

(If you are screwing this part into the old Multiboard Tiles, you might need a different rotation since the thread orientation of the Tiles has been updated. You'll probably need the Top Left or Bottom Right variations instead)

Keep in mind, threads are stronger than Snaps and can take weight in any direction.

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io