"6.25 mm Offset Snaps" screw onto a surface and attaches to a tile, creating a 6.25 mm gap. This part usually goes on the 4 corners of your Multiboard.

This is a "Part A" piece, and attaches to a Part B Snap.

This part comes in a x4 Stack, so the four Offset Snaps are printed on top of each other.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Stack Prints are parts that are printed on top of each other. “Ironing” Stack Prints have a 0.2 mm gap between each print and use ironing to prevent sticking.

Settings: Turn on "ironing" for top surfaces. Set seam position to "random" for more strength (optional). Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

Test out Ironing Stack Printing using this test file: https://than.gs/m/977033

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io