I've designed a flip top trash can that can be easily mounted on certain models of EGO mowers. No more will you have to pick up trash and pocket it while mowing till your near a trash can to throw it out! All pieces are 3d printable. mounts securely to the lower bar on your mower handle. trash can easily spins off and the top comes off so you can easily dump trash into your home trash can.

This model has a total of 8 parts (including 2 bolts). I went with colors similar to my mower but you can mix and match any colors you want for all parts!

Printing Instructions:

• I printed in PLA with standard PLA settings but depending on where you leave you mower might want a more UV resistant plastic.
• 25% infill seems to be plenty enough for strength of all the parts
• Some parts will need Organic (tree) supports
• Included are 2 models for the main can body, one you have to include supports on your own. The other (supports included) model I've designed 3 custom supports at the bottom of the model. these custom supports should work with a layer height of 0.2mm.

****Update 1 - Screw Type mounting I had to update this model as while in use mowing my backyard the can body kept jumping out of the mounting system. I guess maybe my lawn is much more unlevel than most peoples and the bouncing around causes it to wiggle free. Anyhow I updated the connection to a screw type which is much more secure. If you have a bumpy lawn like me you might need the screw type can body and screw type mount.

Other than the 2 parts that are changed all other parts should be interchangeable. I've also left the old design if it works for people and it is prefered.