Here are some fun variations for your Snappy Switch Keychain! (Not for the larger Big Snappy Switch). This download only includes the extras, so you will need to download the original as well for the spring and OG variations.

The 'Blank' Back Case is slimmer, with no space for color indications and a 0.6mm thick back for better clarity when printing with transparent filament, so you can see the inner mechanism!

The wireframe front is a cool design variation that also lets you get a peek of the internals from the front.

All sorts of different Switches to suit your flick-feel, including several 'Phat' switches that are as wide as the entire keychain. Phat switches are combined with the 'Switch_Split' part. Install 'Switch_Split' like a standard switch, then glue on the top part after assembling the rest of the keychain.

Printing Guidelines

Check out this short for assembly tips. Adding a tiny bit of oil and then running the print under water really does wonders for smoothness!

The download includes standard and 'lite' versions of the spring, case front, and case back. The standard version has a stiffer snap, while the lite version is super easy to flip back and forth. You must use either OG or Lite versions for each of those files for perfect fit. You can also print the outer case with or without the loop for a keychain.

Print the 'ColorTag' twice in different colors to use as an indicator switch.

Use your standard best settings at 0.16mm layer height. 2 shells and 15% infill works well.