The Rail is great for displaying plants, but this system has so much more potential! This hook is the first (of many) non-plant related attachments for The Rail. Use it to hang hats, keys, coats, light bags, etc.

To download the essential parts of The Rail as well as the planters, visit the main model page HERE.

How to mount to your wall

1. Slide hook attachments onto dowel
2. Insert wedge into attachments from the bottom. Use a flat head screwdriver to push the wedge all the way in and secure the attachment to the rail
3. Place top and bottom wall mounts on the ends of the rail
4. Insert the keyhole markers into the keyhole slots on the top and bottom wall mounts
5. Firmly press against wall in desired location and the keyhole markers will make an indent where you need to drill
6. Drill holes using a 3/16" drill bit
7. Insert wall anchors and screws (#8 - #10 x 1" screws and anchors)
8. Make sure the screw head is sticking out just far enough to tightly fit in the keyholes. Use the included depth gauge to determine the distance the screw head should be sticking out.
9. Attach rail to the wall

Supports None needed

Scaling This cannot be scaled because it's been designed to fit on a 1" or 25mm dowel

Orientation

• Everything prints upright with its flat bottom on the build plate

Print Settings

• .2mm layer height
• 15% grid infill
• 2 walls
• .1mm layer height for wedge

Filament

Bambu Lab Matte PLA

Colors I used:

• Ivory White

Hardware

• #8 - #10 x 1" screws and anchors

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods