It was highly requested to release the files for this one so here it is! I've included both sizes - 2.75" and 4.5". I've also included a tabletop version in both sizes that does not have the sliding dovetail.

You'll also notice a modified version of the 2.75" command strip mount. It fits the command strips better and leaves no question as to which way you should attach it.

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware Filament I used for this print: Overture Matte Light Brown PLA & Polymaker Matte Marble PLA Command Medium Picture Hanging Strips Hardware: #10-12 x 1-1/4 in screws

Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/