Circle Planter - Tabletop
This is a highly requested tabletop version of my wall mounted Circle Planter!
Since the drainage hole is plugged up by the tabletop stand, you can water your plants by removing the planter from the circle and watering in the sink (this is what I do with most of my plants anyway).
The false back snaps into the keyhole slots to hide them and make it so the planter can be placed somewhere where both sides are visible.
Supports Tree supports are needed for the outside opening of the drainage hole. If you just do automatic tree supports, it should only apply them to the outer opening of the drainage hole.
Scaling Can be scaled however you want.
Orientation
- The circle prints with the keyhole slots facing up
- The stand and false back print with their flat sides on the build plate
Print Settings
- .2mm layer height
- 15% grid infill
- 2 walls
Filament & Hardware
Filament
Colors I used:
- Bambu Lab Dark Red Matte PLA
- Bambu Lab Mandarin Orange Matte PLA
- Bambu Lab Grass Green Matte PLA
Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods









.jpg&w=3840&q=75)








.jpg&w=3840&q=75)



