🌙 Cat on the Moon – HueForge Bookmark Edition A peaceful cat rests on a glowing crescent moon, gazing into a starry night—this multi-color HueForge bookmark is the perfect companion for your next reading adventure. With soft gradients and simple elegance, it’s ideal for cat lovers and dreamers alike.

🔍 HueForge Preview Tip: The file may appear entirely black until sliced. To preview how it will roughly look, switch your slicer’s color scheme view from Line Type to Filament or Summary. Keep in mind: slicers cannot fully visualize HueForge color mapping, so actual results may vary slightly.

📐 Model Specs:

Dimensions: 42 mm x 145.24 mm

Recommended Layer Height: 0.08 mm

Base Layer: 0.16 mm

Infill: 100% for optimal HueForge performance

Supports: None required

Brim: Optional but helps with bed adhesion

🎨 Filaments Used (3 unique colors):

Black – PolyLite PLA Black (TD: 0.3)

Dark Gray – BambuLab Tough Gray (TD: 1.8)

Peach – PolyTerra Pastel Peach or Silk Champagne (TD: 3.5)

🧵 Manual Color Change Instructions – No AMS Needed This model is printable on any single-extruder printer using manual swaps.

The file contains preset pause points. Your printer will automatically pause when it's time to change filament. Here's what to do:

Start with Black

⏸ At Layer #13 (1.12mm) → switch to Dark Gray

⏸ At Layer #15 (1.28mm) → switch to Peach/Champagne for the rest of the print

✅ Resume the print after each change. Be sure to purge your nozzle before continuing.

📸 Optimized for vibrant contrast and smooth transitions with HueForge 🖨️ Tested on Bambu Lab A1 Mini – fits even small beds with ease!

☕ Like this model? Support more designs!

Buy Me a Coffee

Or tip via PayPal: pavgeorgesc@gmail.com