Clicker box Pony with Biscuit box
I've created a new biscuit box and a new pony cap as well! I made sure that all of the animals are interchangeable with all the boxes! I recommend using V2 going forward.
- The biscuit box also includes a 3MF version with fuzzy biscuits!
- 2 walls, 15% gyroid or 3D honeycomb infill. No supports.
- I don't recommend scaling this design
- Z seam should be set to "back" to avoid it printing on the face of the sculpts
- You can change the direction of the head tilt in the slicer by right clicking, selecting mirror from the drop down menu, and then mirror X axis
- for the switches Please be careful if you are clipping off the metal prongs, pointing it away from your face, I recommend clipping them because they are sharp, however clipping isn't necessary for the clicker to function.
- The Switches I am using are called Kailh Box Jade Switch. Amazon. ca link -> Click here
++ Editing the 3MF ++ avoid using the slicer's fill tool when coloring the eyes and eye shine, because they are split to parts. Instead, assign color to them from the object list.
💖 Shout out to Jazzy who allowed me to remix her clicker! You can find the original clicker below with personal use and one time commercial license option as well -
**⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ ** + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌
















.png&w=3840&q=75)




