Clamp compatible with BioRad gel
1 downloads · 25 days ago · All I did was take Berendg's model [https://www.thingiverse.com/thing:3268603](url) and shrink the i
This model is restricted by licensing terms.
View license.
All I did was take Berendg's model https://www.thingiverse.com/thing:3268603 and shrink the inner diameter of the hole. They made it 0.8 mm bigger than needed, so if your printer needs that clearance for the ID of holes, use the original. If you have your software set up so that you make this clearance on your own and your prints match the true size of the model, use this one.
Clamp compatible with BioRad gel
1 download · 25 days ago in and
This model is restricted by licensing terms.
View license.
1 Inch C-Clamp – 3D-Printed Adjustable Clamp | Free Download!
25mm C-Clamp – 3D-Printed Adjustable Clamp | Free Download!
70mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
30mm C-Clamp – 3D-Printed Adjustable Clamp | Starter Member Access
45mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
6 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
1 3/4 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
2 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
1.5 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
50mm C-Clamp – 3D-Printed Adjustable Clamp | Starter Member Access
150mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
40mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
90mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
60mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
80mm C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
3 1/2 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
2 1/2 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
3 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
1.25 Inch C-Clamp – 3D-Printed Adjustable Clamp | Pro Member Access
