Kekreations4.2K followers

Become member

Dragon Shoulder Puppet

Name: Dragon Shoulder Puppet
Brand: Kekreations
SKU: 1117915
Price: 3 USD
Availability: InStock
Rating: 5 (201 reviews)

225 downloads · 2 years ago · Print recs: 2-3 walls 5-15% infill No supports Feel free to size up or down! Tested between 60 and 1

Purchase model for $3 USD

This model is restricted by licensing terms.

View license.

Description

Print recs: 2-3 walls 5-15% infill No supports Feel free to size up or down! Tested between 60 and 160% scale Print 4 hinge pins with dragon.

I used fishing line and a small bead at the end to weave through the head and down the chest, there's a channel at the top of each neck segment to feed the line through.

The harness is a snug fit and depending on what filament you use, may need to scale up 1-4% or so (I.E silks expand more than basic PLA)

Prints with NO supports and easy assembly!

All Kekreations designs are under Copyright and you may NOT sell any digital files or prints of my designs.

If you are interested in obtaining the rights to sell commercially, you can join the Thangs Membership!

Check out my socials to keep up with other designs in the works! Instagram Tiktok Facebook Youtube

Feel free to tag me or DM me on any socials if you post photos, I would love to see them! <3

Tags:

Community Makes (1)

My kids love it so much! I scaled it done to 80% to fit a smaller shoulder which also allowed me to fit the entire dragon on one build plate and print it all at once with no supports! I attached the harness to a really basic bit of foam shoulder armor that I made so that it would blend in with their ren fair costumes.

Community Makes (1)

Discussions

HeyNoniNoni1 year ago

My kids love it so much! I scaled it done to 80% to fit a smaller shoulder which also allowed me to fit the entire dragon on one build plate and print it all at once with no supports! I attached the harness to a really basic bit of foam shoulder armor that I made so that it would blend in with their ren fair costumes.

PrinterAnycubic Kobra 2 Neo

MaterialPLA

Layer height0.2 mm

Infill density15 %

SupportsNone

7yetisins2 years ago

I love these prints but I can not figure out how to attach them to you with straps, I feel silly asking.

Kekreations2 years ago

Thanks so much! I just made 1 large loop between 2 of the straps and 1 small loop between the other two, and then had my arm through the small one and across my chest for the larger one :)

MIRIX972 years ago

Fantastic! Just what I need for my school! We have Book dragons :D in our school library, I am the Book Dragon Master ;) @Trollboda on Instagram. Is it posible for you to make a slow video on how you make the dragon move so adorible on your shoulder?

Kekreations2 years ago

Awww yes! That's so wonderful!! And absolutely! I'll make a more in depth video about putting him together :)

marieldelao2 years ago

Ya tienes el video perdon?

Kekreations2 years ago

https://youtu.be/Ue80NzaFUPc?si=fryPfakzNyhHgvZn ❤️

sprague000024 months ago

Can you tell me where to purchase the harness?

Kekreations4 months ago

The attachment 3D printed piece is included with the dragon :) You just need to add ribbon or straps of your choice to make it a harness.

dmulder2 years ago

First of all, incredibly nice print! 😍😍😍

I did my first test print at 60%, which turned out to be too small at least with the settings I had on an A1 mini. Couple of parts became fused that weren't supposed to be fused. Might be I did something wrong, but my recommendation is to go a bit bigger than 60%.

@Kekreations: For whatever it is worth, I would totally pay for: a model that is more puppetable (either pull wings up and down, or maybe impossible where the head could be pulled left/right) and for 'alternative' heads for this model (going to try to make my own head... probably going to fail 🤣).