Kas_designs
Kas_designs11 followers
Follow
Kas_designs
Kas_designs
|
Image 1 of 3
ReACTIVE No.2 (Halfshell).stl 3d model
Kas_designs
Kas_designs
|
Image 1 of 3
ReACTIVE No.2 (Halfshell).stl 3d model
ReACTIVE No.2 (Halfshell).stl 3d model
ReACTIVE No.2 (Halfshell).stl 3d model
ReACTIVE No.2 (Halfshell).stl 3d model

ReACTIVE No.2 (Halfshell).stl

The ReACTIVE series is a collection of biomimetic, algorithmically sculpted light fixtures, inspired by nature. Every entry is generated by using the same algorithm, while varying the parameters. Pollen grains and phytoplankton come to mind. āš™ļøā˜˜ļøšŸ§ 

This is the second entry into the series in a half-shell, twist-lock configuration. Configured for in-ceiling/wall mounted lightbulbs such as MR11.

If I get 100 followers on here, I will consider releasing more, as well as the raw STLs for each so you can play with them at home.

WARNING: Do not use with anything other than LEDs. Doing otherwise will result in heat deformation.

Consumes approximately 160g of PLA. Diameter of approximately 100mm.


Discussions

ReACTIVE No.2 (Halfshell).stl

2Ā downloadsĀ Ā·Ā 1 year agoĀ inĀ Ā andĀ 
Kas_designs
Kas_designs11 followers
Follow