Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign I think the classic design is good for the lighting used in the interior. So this time, I designed an oil lamp type lighting. Just put the LED candle light inside the transparent part.

The way to put the LED candle light is by lifting the transparent part and putting it in, just like lighting a real oil lamp.

The making process is as follows.

Please refer to the video. https://youtu.be/g1XNvejtNa4 https://youtu.be/brzCUpNRnfg

First, fold each of the 2 frames.

Connect the frame to the Kerosene Container and Ventilator Holder.

Place the small ring first, then the larger one on the transparent glass chimney.

Insert the Ventilator from the bottom up into the Ventilator holder and insert the Ventilator cap.

Insert the glass chimney under the ventilator.

Insert the lever into the hole in the center of the Kerosene Container and then insert it into the hole in both frames.

Insert the frame handle into the frame, and also insert the Ventilator handle into the Ventilator cap.

Finally, screw cap into the oil container (Kerosene Container) and insert it to complete.

To use, simply lift it over the transparent Glass Chimney and tilt the LED candle into it.

※ Only LED candles should be used. You should never use real candles.