Thanks to the enthusiastic response of customers to the Nissan GTR, the Dodge Charger, which has been requested a lot, was made in a folding way. The Dodge Charger is a very popular car because it has appeared in many movies and TV shows. In particular, it became more famous by appearing in Fast and Furious, Duke of Hazzard. This car is designed so that the wheel is placed inside the body, so the lower part of this car is divided and printed so that it can be inserted later.

When folding the body, make sure to check the positions of the protrusions and holes required for connection.

The folding order is as follows:

1. Fold the lower body of the vehicle and complete the lower body of the vehicle first. When fitting the tire, the printing bottom must be inward.
2. Put the side of the upper body of the car on the lower body first, and then the hood and the trunk on the sides.
3. Insert the other side into the lower body.
4. Press the ceiling from top to bottom to fit it.
5. Then put in the rest of the front radiator grille, rear bumper, engine and hood, and you're done.

This Dodge Charger is also very popular for tuning by a lot of people. So I designed it with engine tuning in mind. Please also look forward to tuning parts!

Be sure to check out the video! https://youtu.be/6Oop_GzBdUI https://youtu.be/N6usdN2oKcU

1 : 38 scale

When expanded, size = X 90mm, Y 140mm, Z 37mm After folding X 53mm, Y 142mm, Z 39mm

Design by GOODesign