Thor's Hammer Double Clicker

If you've always wanted to be Thor the might Norse god of thunder and wield Mjölnir AS A DOUBLE CLICKER, now you can! Both sides of the hammer can use different strength switches for more fidget clicky lightning-free fun!

Printing Notes: There are 2 print plates: #1 Hammer top and hammer heads #2 Handle

The switch sockets in the hammer top and hammer heads are labeled to help with lining them up.

We recommend using a brim on the handle as well as 5 walls on the handle for strength. Also, the top of the hammer has pre-painted normal supports on the bottom side. The heads of the hammer print with no supports, but you may want to test them on your printer to make sure the bridging works with no supports. The handle is colored by layer to not only reduce waste, but make it easy for those with single color printers to add a pause and swap filaments.

The hammer uses 4x Kailh Box 3 pin keyboard switches. The recesses include holes for both the standoffs and the copper pins, so you don't have to wast time trimming them! The clickers and tops snap in place, but we HIGHLY recommend glue for safety with children.

Use Octagram Spiral as a top and bottom surface for an extra lightningy look!

Model Files in Download 2 color .3mf 1 color .3mf

Filaments Used in Photos Hatchbox Silver PLA -Hammer Head/Details Bambu Dark Chocolate Matte PLA -Handle