Headbands Set 1 Goose Gear for Porch Goose
Headbands Set 1 Goose Gear for Porch Goose
Our first set of Headbands Goose gear includes; maple leaves for Canada Day, American flags and Statue of Liberty hat for the 4th of July, and Stars!
THIS DOWNLOAD IS FOR THE 4 HEADBANDS ONLY The Porch Goose is included in the welcome pack, and you can also find it here: https://thangs.com/designer/FunFam3D/3d-model/Porch%20Goose-1495648
Printing Notes: If scaling, make sure to scale the accessories and the goose together. The hat is designed to be a tight fit. You may need to test your filament to make sure it doesn't shrink too much after cooling. The hat has manually painted tree supports. We used 2 support walls and a wider support base than the default. We added images of how the manual tree painting looks to help.
Models in Download Multi-color .3mf 4 Headbands .stl
Filaments Used in Photos DUDV2 Green Matte PLA -Liberty Hat Gratkit Moonstone PLA -Liberty Hat Giantarm Silver Metallic Silk PLA -Hat Bambu Bluegray PLA -Liberty hat Bambu Blue PLA -Stars Bambu Dark Blue Matte PLA -Flags Bambu Red PLA -Flags Bambu Ivory White Matte PLA -Details/Goose/Flags Bambu Pumpkin Orange PLA -Beak/Legs Bambu Cyan Blue PLA -Goose eyes
Headbands Set 1 Goose Gear for Porch Goose
Dress Up Porch Goose for Goose Gear
Porch Goose, 54cm/21"
Silly Porch Goose NO AMS Scalable
Not So.. XL April showers Goose, for smaller build plates, below 300x300x300
XL April Showers Goose, for large build plates above 300x300x300mm
Plain Goose update pack
NOT SO… XL APRILS SHOWERS GOOSE
Not So XL Urban Goose, for smaller build plates below 300x300x300
XL Urban Goose, for larger build plates above 320x320x320
XL Summer Goose
Cat-O-Lantern Candle Holder
Modern Headphone Stand
Festive Lamppost
Not so… XL Nutcracker, for smaller build plates
Goose Hydra - Tabletop Miniature
Not So... XL Elf,
.jpg&w=3840&q=75)
Reindeer headband v2
.jpg&w=3840&q=75)
Reindeer headband v4
.jpg&w=3840&q=75)
Reindeer headband v1
.jpg&w=3840&q=75)
Where do I find the sandals at?
Those are with the original Garden hat here: https://thangs.com/designer/FunFam3D/3d-model/Garden%20Hat%20%26%20Human%20Feet%20Goose%20Gear%20for%20Porch%20Goose-1534435
I mean the ones she is wearing in all the pics above.
Oh, sorry about that! Those aren't out yet, but I'll check and see if they're done prototyping.
Are the hats supposed to “snap” on? I printed the liberty and can’t get it on. Probably totally just user error. 🤣
Some "snap" harder than other designs, and filament can make a big difference.
Try pushing down and back little after lining up the eyebrows with the cut outs in the front, and make sure the feathers on its head line up with the dents on the inside.
May I ask what support settings you use to print these? I wanted to create smaller versions, so following your suggestion I combined with the goose and reduced to 40%. The Goose and feet printed fine. I've been unsuccessful in 4 attempts at generating prints of the American Flag headgear and one of the Star. I'm using a Snapmaker U1 and tried different support settings, but it very diffucult to removed the supports afterward, and they were many small bits melded to the main print.
Hi! 40% is very small. We don't really recommend going below 150mm Z height for the goose body since all of the tolerances start to tighten up too much. You can email us design@funfam3d.com and we may be able to help.