Like the 2025 Crystal Dragon, this is another 2025 Remake of the original Flying Serpent Design!

The original design is so popular but has some flaws that have needed addressing. This 2025 Version is a COMPLETE remake with new feathers, less overhangs, thicker feathers, and updated wings! This version was specifically designed to fix the wing bed adhesion issue that the original had, giving much more surface area to the base of the wings!

I tried very hard to keep this version as close as possible to the original since it is such a favorite! I also included a special .3MF Color File that took a lot of time but I'm so excited to share it! I hope you all enjoy this!

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

For commercial license and monthly bonus models, click here!

Filaments I use! Not an exhaustive list but if I remember, it'll be here! Amazon Affiliate links!

3D PRINTING SETTINGS

FDM Settings 3 walls 10-25% infill No supports Try brims if you have adhesion issues. Models tested between 60-100% generally

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.