Baby Sunflower Dragon

2.6K downloads · 10 months ago · Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun des

This model is restricted by licensing terms.

View license.

Description

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

Commercial License and monthly bonus models: Thangs Memberships Patreon MMF Tribes 3D PRINTING SETTINGS FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.

Tags:

Community Makes (5)

A 60% sunflower baby printed in Bambu matte yellow, matte white, basic green, and basic brown

I finally found a green/yellow silk filament that I liked to make this dragon. I used a tiny bit of bronze silk for the claws and was able to put a pause in to switch colors before it got to the eyes. Love it!
I did have to decrease the size to 91% for it to for on the a1 mini plate, but that was easy to do in the slicer.

Community Makes (5)

Discussions

HobbyMaine2 years ago

Hayden_1 year ago

A 60% sunflower baby printed in Bambu matte yellow, matte white, basic green, and basic brown

PrinterBambu Lab P1S

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPLA

Layer height0.2 mm

Infill density8 %

eric.peter.anderson1 year ago

I finally found a green/yellow silk filament that I liked to make this dragon. I used a tiny bit of bronze silk for the claws and was able to put a pause in to switch colors before it got to the eyes. Love it! I did have to decrease the size to 91% for it to for on the a1 mini plate, but that was easy to do in the slicer.

PrinterBambu Lab A1 mini

Print bed sizeX: 180 mm; Y: 180 mm; Z: 180 mm

MaterialPLA

Layer height0.2 mm

Infill density15 %

DawnStar Stamping1 year ago

Gold and Copper silk

PrinterAnycubic Kobra 3

MaterialPLA+

Klumos2 years ago

Baby Sunflower Dragon!

eric.peter.anderson1 year ago

I'm currently printing this dragon and it's turning out great! I was curious though, the 3mf file that shows as being included in this download doesn't seem to be in the file. Am I missing something? Thank you so much!

Cinderwing3D1 year ago

Oh good catch! I'll get that fixed