Week 32 is finally here - First up is a set of sunset bookmarks featuring the silhouette of an anime girl.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Lilac Purple At layer #8 (0.72mm) swap to Red At layer #17 (1.44mm) swap to Yellow for the rest.