The flight of the Falcon - Set of Bookmarks
3rd set for week 46.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Orange (10300) At layer #15 (1.28mm) swap to Yellow (10400) At layer #21 (1.76mm) swap to Jade White (10100) for the rest.
The flight of the Falcon - Set of Bookmarks
Mechanical Falcon
Horus Feathered Falcon Mask
Falcon Bird Guardian Air - Figure decorative & keychain
f16.stlF-16 Fighting Falcon Military Jet model
Pharaoh Falcon Bust God Printable STL Design
BICSaber – Write with the Power of the Force!
Star Wars Cookie Cutters
Horus Wall Mounted Decor Plate
LITTLE WYVERN
Bird in Flight Silhouette Earring 2.stl
Teardrop Bird in Flight 2.stl
Teardrop Bird in Flight 1.stl
Circle Bird in Flight.stl
Teardrop Bird in Flight 5.stl
Teardrop Bird in Flight 4.stl
Bird in Flight Silhouette Earring 4.stl
Bird in Flight Silhouette Earring 5.stl
Bird in Flight Silhouette Earring 3.stl
Bird in Flight Silhouette Earring 1.stl
