Here is Lego Hand MagSafe Charging Dock, This awesome Fan Art design is designed to look like a Lego hand but holds and charges your phone. The design is for an Apple MagSafe charger and can fit up to a Iphone 16 plus, the design includes a cable channel through the main body and is separated into parts making it easy to print and assemble. To assemble the design Simply Insert the Lego stem into the Lego hand, the stem is an oval so to lock the stem into the hand twist clockwise or counter clock wise, I recommend inserting the cable through before putting the hand and stem into the stand, to have the cable sit nicely insert most of the way then at the very end twist 90 degrees and push it to one side then place the MagSafe charger onto top of the cable to lock it into place. No glue needed, If the Hand is too tight for the charger, bend the hand slightly to insert. Print settings, Nozzle size 0.4mm, No supports needed but you can use normal supports for the Lego hand, Print speed 100mms, Layer height 0.2mm, Infill 15%, Wall Count 3,