Kit Fisto's Collapsing Lightsaber Multi-Part Version

This version of the lightsaber has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for all the parts. The cap is screwed on so the blades can be printed separately then inserted or replaced.

None of the parts require supports, for best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a time in vase mode. Find detailed instructions on how to print collapsing swords on my website.

The hilt prints upside down so the fins by the emitter will print without supports. Make sure you add a large brim or helper discs because there is not a lot of contact with the bed.

There are two versions of the hilt and cap. One version is split apart for a multi-color printer the other is one piece for single color or manual color swaps.

Assembled with Starbond Medium CA Glue (aff.)

Printed on the Mudex rep-rap IDEX printer. with Polymaker Metallic Pro PLA and Matterhackers Build Series PETG Transparent Green