Star Wars String Artwork

1.2K downloads · 4 years ago · A Star Wars String Artwork. Print at 0.3mm layer height without supports. If you are using Prusasl

This model is restricted by licensing terms.

View license.

Description

A Star Wars String Artwork.

Print at 0.3mm layer height without supports.

If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.

This model will fit on a 180mm square buildplate.

Community Makes (5)

Simply stunning model printed here in Eryone Matte Aqua Blue filament and printed on a Prusa Mini 💙

Imprimé en noir avec effet holographique sur la partie haute bu @art3dchoix

Community Makes (5)

Discussions

Barry Webb2 years ago

Printed these a while back. They are looking great on my office wall!

casten.riepling4 years ago

Really exciting stuff. I feel like this would be tough to pull off on anything other than the X1 or another CoreXY. Have you printed this on a lower speed printer with less cooling ability? Did you have to model the lines with the same (or slightly smaller) thickness than the nozzle width? Can you upload the 3mf?

bryantologist4 years ago

Aha, I found the "Detect Thin Walls" checkbox under Strength tab when Advanced mode is active, the strings show up!

bryantologist4 years ago

I just got a Bambu Labs X1 Carbon and by pure luck, I printed the Sailboat design first and it worked great with the Bambu Labs slicer. I just printed another with bi-color silk filament. I used the recommended 0.3 layer height suggested to pick up the strings. Now I'm trying to print her other designs, including this one, and the slicer view doesn't show the strings like it did with the sailboat. This has been the case with several models. I've tried altering the layer heights with no luck. In between the first and second sailboat, Bambu Labs updated the software to include the new Arachne feature, so I was suspicious that feature broke it but the sailboat sliced OK but the others still did not. I think the Advanced settings show actual extrusion width as 0.42mm so perhaps the strings are exactly 0.4mm and the "< 0.42" factor trims them away. Haven't found the setting to keep thin walls in Bambu slicer.

ThomasDN4 years ago

I printed mine on my old, first generation Ender 3.

robemil864 years ago

Love the piece. Any way to make the string section solid? For the life of me, I cant get that part to work on printer and it just destroys what would otherwise be a piece to die for.