3d_factorybox6.3K followers

Universal Controller Stand - Inspired by Wolverine 3d model

Universal Controller Stand - Inspired by Wolverine

1.2K downloads · 15 days ago · If Wolverine had a PS5... This controller stand isn't for the faint of heart. Would you put it on yo

This model is restricted by licensing terms.

View license.

Description

If Wolverine had a PS5... This controller stand isn't for the faint of heart. Would you put it on your gaming setup? Yes or No?

PRINT SETTINGS & INFORMATION:

Printer: Creality Spark X & BambuLab P2S (zip file contains also ALL BambuLab printer G_CODE files and also an Anycubic KobraX G_CODE files)
The zip.files contains also all 3MF and all STL files for this model
NO supports needed !!!
NO AMS needed !!!
G_CODES files available also for ALL BambuLab 3D printer!
Universal Controller Stand - compatible with all common Gaming Controller
Nozzle: 0,4 mm
Infill: 5 - 10%
Infill Pattern: Gyroid
Material: OVERTURE Matte PLA - different colors (available on Amazon)
If you have any questions about printing, feel free to contact me on Discord or just on Thangs in the comments!
I recommend to put some glue on the print bed to get an 100% print after all!

IMPORTANT

This model is for private use only. If you want to sell my model in a 3D printed condition, you must join my EPIC - MERCH plan. Once you have entered, you will find all of my models there, which you can also sell commercially.

For more information please read the specifical model descriptions or read the plan descriptions. Also ask me before acting! Please never sell the digital files - this file includes a digital watermark which can proof my copyrights! Have a nice print guys AND stay healthy!

Tags:

Community Makes (2)

This is awesome. Controllers fit perfectly fine.

Thank you so much for the model! I really like how it was designed. Everything fit together perfectly, and the numbering helped a lot with the assembly. I only used glue on the claws; the rest was just press-fit. The final piece is absolutely beautiful!

For the print itself, I used variable layer height in a few areas, going down to 0.08mm to minimize the stepping effect.

Finger #4 unfortunately detached mid-print, so I skipped it to save the rest of the build plate. I ended up printing it separately later and added a brim to help with bed adhesion.

As for the Adamant Claws, I wanted to print them vertically to get a better surface finish and shine. I knew printing them straight up would be risky, so I manually added some custom supports for extra stability. Even with the supports, the claws wobbled quite a bit near the end of the print, but I'm still really happy with the final result. If I were to print them again, I’d keep them vertical but definitely add more supports or place a stabilizing structure against key points to keep them rigid.

Community Makes (2)

Discussions

jedispidey10 days ago

This is awesome. Controllers fit perfectly fine.

PrinterBambu Lab H2S

3d_factorybox10 days ago

Amazing print! Exactly how it should be! :)

jadson.alex11 days ago

Thank you so much for the model! I really like how it was designed. Everything fit together perfectly, and the numbering helped a lot with the assembly. I only used glue on the claws; the rest was just press-fit. The final piece is absolutely beautiful! For the print itself, I used variable layer height in a few areas, going down to 0.08mm to minimize the stepping effect. Finger #4 unfortunately detached mid-print, so I skipped it to save the rest of the build plate. I ended up printing it separately later and added a brim to help with bed adhesion. As for the Adamant Claws, I wanted to print them vertically to get a better surface finish and shine. I knew printing them straight up would be risky, so I manually added some custom supports for extra stability. Even with the supports, the claws wobbled quite a bit near the end of the print, but I'm still really happy with the final result. If I were to print them again, I’d keep them vertical but definitely add more supports or place a stabilizing structure against key points to keep them rigid.

PrinterBambu Lab A1

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPLA

Layer height0.16 mm

Infill density5 %

3d_factorybox10 days ago

Okay, thank you for your experience :) For the next maybe you need to trust my g_code files :)

ariC1236 hours ago

This model description says that after joining EPIC/MERCH, members will find all of your models there and may sell them commercially. However, I do not see this model in the membership preview. Is the preview incomplete, or is this model not actually included? If I join EPIC/MERCH, will I be able to download this exact model and sell physical prints of it?

3d_factorybox5 hours ago

I dont know what preview you mean. Most of my models you can sell with the EPIC/MERCH plan. Some models are not for selling because of the Copyrights - otherwise you have to give this model an other name on your shop... It is your decission.