This remix of the Spring Latch mechanism turns it into a wall mounted cat toy.

https://youtu.be/JA9fNA1EJRw

Customization

Choose between the loose spring or the stiff spring depending on how strong you want the latch hold to be.

Add your pet's favorite toy attachments to the end of the spring arm.

Printing

No supports required.

Print the springs with enough perimeters (shells) so that the arms of the spring are solid.

Assembly

Use a small short screw to attach the spring to your wall. Make sure any hardware sits flush or nearly flush with the latch surface.

The axel is a tight fit inside the handle. Glue or bolts should not be necessary, but the design supports using either.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.