Heart-shaped perpetually poppable fidget toy with a simple TPU mechanism. Based on the Pop Fidget

https://youtu.be/_vFLbze1DHM

Case Options

• Plain heart (works with optional TPU Bumper)
• Keychain Loop Heart

Insert Options

• Default - 0.45mm internal radius
• Loose - 0.6mm internal radius

Button Options

• Default: round on top flat on bottom
• Round (print on side)
• Flat

Assembly

• Press-fit buttons into the case
• If you want to add a TPU bumper, press it on. Add glue if it feels too loose
• No more steps

Bumper

Add an optional bumper to give the heart fidget a larger overall size. The bumper can be printed separately in TPU and forced on. This is not compatible with the keyring loop case.

Printing

This design includes a TPU gasket which is entirely contained within a rigid (PLA/PETG/ABS) frame. Printing requires either a multi-material printer or pausing the print to insert the pre-printed TPU gasket.

Either way

• Print the TPU Gasket with at least 5 perimeter shells
• Print buttons separately from the case

If printing on a multi-material printer

• Turn on the “Interface Shells” so the TPU gasket has a solid base to print on
• If using a wipe tower, set “Wipe Tower Extruder” to your TPU toolhead to create a - reliable TPU wall around the wipe tower

If printing on a single-material printer

• Pause the print just before the layer where the case begins to bridge. Insert the TPU - gasket so that the top is entirely flush

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.