My newest puzzle box design is deceptively difficult. Locate the the solution plaque and restore it to the front of the barrel to display mastery over this fiendish challenge.

As with all box-style puzzles, this design has a hidden compartment, but finding that is only the start!

NOTE This is an updated version of the puzzle that uses a 4mm diameter dowel pin. The videos below show an older version that used a 6mm pin.

Videos Soulution: https://youtu.be/Cz7uQzU-ICY Assembly: https://youtu.be/CYyXHqfosgE

Required Hardware M3 x 70mm Bolt M3 Washer M3 Locknut Spring (5mm diameter x 15mm length)

** Recommended Hardware** M3 x 8mm Length Bolt (x3) O-ring 12mm Outer Diameter 8mm Inner Diameter (x4) Steel Dowel Pin 4mm Diameter 14mm Length (Or cut down a bolt to size) 6mm x 3mm Cylinder Magnet

DK Edition Switch out the cork with a logo cork to create a Donkey Kong barrel. Also included: bananas.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.