This design prints flat and folds into bow. I created this for use with the Reindeer Puzzle.

https://youtu.be/tFeJGP5cVqE

Printing The bendable parts of this model are 0.3mm thick so they will print as a single layer for both 0.2mm and 0.3mm layer heights.

Make sure your bed is very well leveled.

You can switch the filament color after the first layer to give the center of the bow its own color.

Assembly Assembling the bow requires gluing the hexagonal ends into a single spot. The "collar" of the bow twists back around on itself. See the video above for details.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.