Hello, Here i present a Safety Razer Disposal bin, keeping it simple and elegant. Trying to build a nice library of cool and functional opbjects! 

*Prints without support! (must be printed without support) 

* Bottom is preppared fot multi colour printing, just select the pictograms faces 

*Designed to hold enough blades to last you well over a year 

*i highly recommend safety razors since its less plastic, very cheap and as someone with a beard i would opt, them making a cleaner shave anyway 

Would you like to see more of my projects? i invite you to check out my Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next!

 https://www.instagram.com/smackmax_/


 razor disposal, Razor receptacle, Shaving waste container, Blade disposal unit, Razor discard box, Grooming waste bin, Shaving tool repository, Blade storage and disposal solution, Safety razor disposal chamber, Razor waste compartment, Shaver recycling bin, sustainable, Stylish Razor Stand, Versatile Razor Display, razor stand, shaving station, shaving stand

Razor Disposal Bin

C1 Razor Bin.stl

Lunar Catch Crater: The crater Copernicus is one of the more dramatic craters; the center of Copernicus is about 93 kilometers across. 

i printed in 75% x and y scale

I butchered some NASA open-data for this model. The NASA 3D Resourses is a great website to visit, they host masive amount of data there, all open to the public. Those familiar with software like Civil3D or GIS can easily navigate and manipulate these datasets, as they mirror the ones commonly used in civil engineering applications on Earth. If you dont fancy nerding about the datasets, i highly recommend searching for website named NASA's EYES. Here, you'll find interactive viewers, such as a Google Earth-esque viewer of the Martian surface.

 *This model is rendered with a 3x vertical exaggeration and then i put it in a dish lol. 

 


Prints without support! 

Would you like to see more of my projects? i invite you to check out my Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! https://www.instagram.com/smackmax_/


Lunar Catch Crater (catch tray?)

C1 Lunar scape.stl

My projects often revolve around solving niche problems i have. I typically use pill organizers for my supplements, but missing a few days isn't a huge concern. Yet, the constant reminders from these boxes showing me i missed some days makes me feel bad. So here is my roll with a pill/supplement dispenser. Now, I can simply open my cabinet door, grab a pod, and be on my way. 

You can see how it works on my insta/printables ( i can't seem to figure out how to add a video/giff to this lol)

All of my projects that can contribute to health or nature will be free. 

Notes: 

- No support needed 
- The gap in the dispenser is wide enough to fit a bit from a cordless drill/screwdriver
- Alternatively sticky tape can be used to mount the dispenser 
- Pod and Pod cap should be printed with the opening pointing to the sky 
- In my case, my partner has other supplements needs, i use the color caps as a indicated whos who

Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! https://www.instagram.com/smackmax_/ 

If you enjoy my style and would like to support the creative process,I invite you to declare 'war on boring and mundane designs' together by subscribing (with exclusive models) and supporting the R&D of future projects! There's even an option to become a commercial R&D partner! Dont fancy a subscribtion based contribution? You can check out one of my paid models or use the paypal link bellow :) https://www.paypal.com/donate/?hosted_button_id=XTLND2YQYQFFU
 

#PillOrganizer #3Dprinting #SupplementDispenser #MedicationManagement #Pillbox #suplementbox #CustomPillBox #3DPrintedPillBox #SmartPillBox #PersonalizedHealthcare #SmartMedication #HealthTechSolutions #DIYPillBox #PillBoxOrganization #CreativePillStorage #thangs #Printables

Pill Pods (Pillbox / Supplement dispenser)

C4 Pod.stl

Here i present Potter One - weird Plant Pot by SMACKMAX 

Does not need support

Inner diameter is 100mm so scaling to your size is easy!

examples: 115mm=115 %scale, 150mm =150% scale etc!

Would you like to see more of my projects? i invite you to check out my Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! 

https://www.instagram.com/smackmax_/

Click the link tree for: My Socials; Links to Files Affiliate links to filament and hardware i use Decorative object; 
linktr.ee/smackmax

Printed in PLA on Ender 6 / Bambu A1 Consider leaving a review, often i revisit models for updates and upgrades. Many of my projects are personal projects and can be complex to print and assemble so keep that in mind

Omni Planter

Onno.stl

Drawing inspiration from my favorite sci-fi games like Cyberpunk 2077 and Starfield, I designed a watch display box, designed to house timepieces and rings. (it holds my important bits n bops)


Personal project, sharing the project was a idea that came later so that might reflect in the files, dont be afraid to ask for help!
Tools Needed: Superglue (magnets) & Flathead screwdriver (when using bolts like mine, hex also possible)
Bolts, Nuts and magnets (Quantities and Types):
Cylinder Head Bolts (4x40): 14 pieces 
Cylinder Head Bolts (5x10): 10 pieces 
Counter Sink Bolts (4x20): 8 pieces 
Cylinder Head Bolts (5x30): 6 pieces 
M5 Nut End Caps: 6 pieces 
5x2 Magnet cells: 20 pieces (when making the config. as shown
Additional notes:
Tolerances: The tolerances are tailored to my specific 3D printer and settings, so your results may vary depending on your equipment and configurations.
Assembly Options: While the design incorporates numerous bolts, many components can alternatively be secured with adhesive, offering flexibility in assembly.
Bolt Insertion Tips: If you encounter difficulty when inserting bolts, consider using a soldering iron to gently heat the bolt if it's too tight or use a drill to widen the hole slightly for a smoother fit. When the holes are to big, you can insert glue-and-push-the-bolt-in.
Magnet insertion tips: if not snug enough, use more glue. If too snug, heat with lighter and gently press inwards. If it protrudes, heat and gently press aswell.
Non-Commercial Use: Please note that this design is intended for personal and non-commercial use only.
Nut and Bolt Compatibility: The design is optimized based on the nuts and bolts available to me; for best results, use similar hardware when assembling.
The inserts: only work in 1 or 2 position. Make sure you print the right one for the right corner.
On both sides of Clam files: There is room to Snap in a single line of filament.
Bolts screw directly into components: See last picture as example (needs a bit of force)



Would you like to see more of my projects? i invite you to check out my Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! 
https://www.instagram.com/smackmax_/  

Loot Crate Storage Container

c1-total-dont-print.stl

Here, I present yet another storage contraption, this one sporting a fully symmetrical design which was the challenge I had In mind. Please read the text bellow before printing. 

05-02-2024: Veetec3D is now offering hardware kits for this model (this is not me, but in collaboration with me :)

 https://veetec3d.etsy.com/listing/1672804097/cosmic-symmetric-stashbox-hardware-kit 

17-01-2024: Added files with 8,5mm opening for rods 

03-01-2024: added additional notes to the text 

Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! https://www.instagram.com/smackmax_/ 

Many projects were just personal projects at the time; I did not expect this much love. Because of that, they can be complex to print and assemble, so keep that in mind before you print and read the additional notes in the description. Looking at the reviews and makes by others can also help you make that decision. 

Requirements:

4 x Rods with a diameter of 8 mm and a length of 195 mm (i used aluminium 8mm about 2 euros per meter at the local hardwarestore)

Filament of your choice for 3D printing (i used fiberlogy copper,gray and graphite PLA)

8 x Allen bolts (4x15 mm) (used for attaching the Handle/Grill File to the side plates)

12 x Allen bolts (4x10 mm) (used for securing the rods in a fixed position, used in side plate and the locking Wing file)

4 x Allen bolts (5x20 mm) (used for attaching clips)

4 x Hex nuts (M5) (used for attaching clips)

superglue (used for attaching the option tray butt file, but this makes it no longer truly symmetric, and if needed to secure the Clam to the side plate but should pressure fit)

-------------------------------------------------------------------------------------

Things to note:

-The rods can be any material but I found the aluminium can be a bit oval, the sliding action needs perfect 8mm rods to slide nice and free.

-Sanding the contacting surfaces might be needed for smooth operation

-Heat can be used to press in place bolts and nuts if they don’t coorparate

-Handle and Grill file can be switched for a fully symmetric look

-print oriëntation(all need support): Shells should be printed with the lips pointing upwards, sides can be printen on their back, handle and grill on their back aswell (handle needs support under the bridge), wing lock should be printen like a arrow pointing upwards, the clips go on their side.

-------------------------------------------------------------------------------------

(03-01-2023) additional notes:

I have added a video showing how the mechanisme works;
I have addes superglue to the list of needed materials and make small notes where what hardware goes)
Added additional note and picture about my suggested print orientation;
The tray butt is a optional file that needs to be glued in place, due to it not making the thing symmetric;
The Shell needs to be glued to side plate if your friction fit is not enough (mine does not use glue);
The design is zero-tolarance, so drilling out some of the holes might be needed;
If you enjoy my style and would like to support the creative process,I invite you to declare 'war on boring and mundane designs' together by joining my Printables club(with exclusive models) and supporting the R&D of future projects! There's even an option to become a commercial R&D partner! Dont fancy a subscription based contribution? You can check out one of my paid models or use the paypal link bellow :)

 https://www.paypal.com/donate/?hosted_button_id=XTLND2YQYQFFU 

Cosmic Symmetric Stashbox

t1-full-model-dont-print.stl

TUBE
Here I present yet another storage contraption named TUBE. In this one, I challenged myself to create a mechanism without the use of any hardware. On my latest projects, I've received feedback about the complexity, and this is my response to that. Please read the additional notes below before you embark on printing the TUBE.

Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! https://www.instagram.com/smackmax_/ 

 
Requirements: 
- Superglue (or any other glue) 
- Filament of your likeing 
Notes: 

- Print orientation: see picture with suggested orientation 
- The clam should be glued to caps 
- Cap consists out of 2 parts (not symmetric due to the threads) 
- Operation is sliding and screwing with the palm of the hand
- Printer used: Creality Ender-6
- Designed with Fusion360 
- Printed in: PLA, Fiberlogy Easy grey, Graphite, and Copper 
- 3 Walls, 8% Infill, 0,2 layer height, ''standard'' printer profile with wall speed upped to 60 support at >54° (standard zigzag support, no hassle)
------------------------------------------------------------------------------------------

 

If you enjoy my style and would like to support the creative process,I invite you to declare 'war on boring and mundane designs' together by joining my Printables club(with exclusive models) and supporting the R&D of future projects! There's even an option to become a commercial R&D partner! Dont fancy a subscribtion based contribution? You can check out one of my paid models or use the paypal link bellow :) https://www.paypal.com/donate/?hosted_button_id=XTLND2YQYQFFU 

Decorative object; Printed in PLA on Ender 6 / Bambu A1 Consider leaving a review, often i revisit models for updates and upgrades. Many of my projects are personal projects and can be complex to print and assemble so keep that in mind

TUBE

C1 DONT PRINT.stl

In this tier, you place your trust in the development of more projects by influencing the time I spend on designing objects. Your support contributes to scaling up operations and publishing more files. 

Together, we can empower Development and Manufacturing.

Commercial use is now allowed: You have permission to sell prints. Subscription benefits ("Commercial R&amp;D Partner") are active only when your subscription is active. Please ensure to add "Design by SMACKMAX" to the description of the item. However, selling of the files is not allowed.
 

Models for commercial use
Permission to use physical prints of selected exclusive models for commercial purposes during active membership. Whether a specific model can be used for commercial purposes will be clearly stated in the model details. Reselling the 3D model files is not allowed.

All the commerce

Acces to all the models and more! By joining this tier, you directly support my creative process, enabling me to dedicate more time and resources to designing and printing new projects. Together, we declare war on boring and mundane designs! I greatly appriciate your support and adds so much motivation! Not commercial

All the files 

C1 Big Clam.stl

C1 Cap Full.stl

C1 Cap Top Half.stl

C1 Knob.stl

C1 Lower Half Cap.stl

C1 Orna.stl

C1 Top Clam.stl

C2 T CAP BOT.stl

C2 T CAP TOP.stl

C2 T KNOP.stl

C3 T KNOP.stl

C5 T KNOP (extra tolerances+0,2mm extra).stl

c1-clipppy.stl

c1-grill-cover.stl

c1-handle-orna.stl

c1-side-plate-print-twice.stl

c1tray-butt.stl

c2-85mm-locking-wing.stl

c2-85mm-side-plate-print-twice.stl

c2-clam-shell-print-twice.stl

c2-more-tolerances-clipppy.stl

c3-85mm-clam-shell-print-twice.stl

c4-85mm-200mm-rod-holes-spacing-clam-shell-print-twice.stl

c1-locking-wing.stl

c1-clam-bottom.stl

c1-clam-top.stl

c1-clip-print-twice.stl

c1-cover-bottom-left.stl

c1-cover-bottom-right.stl

c1-cover-top-left.stl

c1-cover-top-right.stl

c1-holder-bumper-print-twice-per-core.stl

c1-holder-core-print-z-at-98percent-if-fit-is-too-snug.stl

c1-insert-ring-holder-bottom-right.stl

c1-insert-watch-holder-bottom-left.stl

c1-insert-watch-holder-bottom-right.stl

c1-insert-watch-holder-top-left.stl

c1-insert-watch-holder-top-right.stl

c1-lid-insert-optional-under-development.stl

c1-mid-orna.stl

c1-ring-holder-nipple-top.stl

c1-ring-holder-nipple-under.stl

c1-side-bottom-left.stl

c1-side-bottom-right.stl

c1-side-top-left.stl

c1-side-top-right.stl

Here i present SPOT a light source i quickly drew up to point some radiant energy at my printers by SMACKMAX sports some pre-packed add-ons aswell (E27 fittings).

Notes: 

Needs 2pc: M3 Hex Bolt (3x20mm) 
Glue to secure Lens to Shell Includes many diamets, i use 35mm for phillips hue colour ambiance E27 (measure your bulb) 
Some sort of fitting thats able to hold E27 Bulb
 

 

Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! https://www.instagram.com/smackmax_/ 

Decorative object; Printed in PLA on Ender 6 / Bambu A1, consider leaving a review, often i revisit models for updates and upgrades. Many of my projects are personal projects and can be complex to print and assemble so keep that in mind

Smackmax

Pinned models

TUBE

Cosmic Symmetric Stashbox

Loot Crate Storage Container

SPOT

Razor Disposal Bin

Lunar Catch Crater (catch tray?)

Pill Pods (Pillbox / Supplement dispenser)

Omni Planter

Loot Crate Storage Container

Cosmic Symmetric Stashbox

TUBE