Pretty simple.  This is a two-piece cover for IIIDMax.  I usually buy their PLA+ 10 rolls for $120 deal so I have quite a few of these boxes lying around.  They're nice boxes and you can store things in them…. Except for the hole they put there so you can see the color.  This plugs that.

Use the your multicolor tool to make a label, label maker…  Or if a permanent marker.  Your choice.

This is a quick an easy print.  I print at the .28 layer height and it's 17 minutes for both pieces (after the 6 minute calibration so 30 minutes for just one pair by themselves) of the cover and 11g of filament.  

Thin cover to conserve filament and save time, so if you go to remove it, it might break.  Be careful.  

IIIDMax Affiliate Link If you're interested in both cheap, good filament and also supporting me since I get a 5% cut from purchases:  https://bit.ly/3QwZvgh

Or use code “Worsty”  

.Step Files Provided

Steal it, slap your logo on it, sell it.  Hard for me to care.  Just, if you can, link back to me.  


 

IIIDMax Box Hole Cover

IIIDMaxCoverFemaleV6.stl

Full Install + Setup Guide:
https://youtu.be/dRUDWmKcU10

Amazon link to Tapo C110:
https://www.amazon.com/dp/B09YL5G1Y8?psc=1&ref=ppx_yo2ov_dt_b_product_details

Camera mount for the TP-Link Tapo C110 to be mounted on the LCD screen of the P1S/P.  Camera provides an easy and nice looking way to check in on your printer, a much needed upgrade from the stock 720P 0.5FPS camera that comes with the printers. 

Has wire guide for the wire to cleanly exit the mount to either the left or right.  I don't know who'd go to the right, but the option is there.  

Default file has an aesthetic rim for those with an AMS, but a flat file provided for those who want a simple print or don't want to do a layer change.  

.Step files provided.

21g of filament
1 Hour on P1S Standard Speed

Printing Suggestions:  

Print with .20mm layer height or lower. Slicer, by default, will place a bridge along the wire guide which may not come out right. 



Steal it, slap your logo on it, sell it.  Hard for me to care.  Just, if you can, link back to me.  



If you're using the Xtouch as well,
FrancescoM  has made a remix that lets you incorporate both!

https://makerworld.com/en/models/61962#profileId-64422

TP-Link Tapo C110 Camera LCD Mount for BambuLab P1S/P

TapoC110LCDMountWithAestheticV2.stl

https://youtu.be/F_SakH7Y1-Y

I printed out the Hydra mod for the Bambu AMS unit by humebeam (https://makerworld.com/en/models/18570#profileId-19327) and really liked their design for the desiccant boxes. So I made it larger, made it more ventilated, changed the screw hole position, changed the screw hole design.



I had a 2LB bag of desiccant for an airtight storage tote and decided to make a desiccant box with a sliding lid, ventilation holes, a pull lip, and locks in place with a screw. This prints without supports, uses 54G of filament, and on my strength-profile for my P1S, prints in 3.5 hours on stanard. The slots are 2mm wide.  Don't shake it too much, as some beads inside might break in half and be able to slip out.  



A funnel is reccomended to pour in the desiccant beads.  I've accidentally spilled them twice and I promise you they manage to get absolutely EVERYWHERE!  

Use an M3 Screw ranging from 6mm to 12mm to lock in place.  Use a little “oomph” when screwing it down the first time so it creates its own threads.  



.Step files included - Take and remix to your desired size or what have you.  Steal it, sell it; it's hard for me to care.  But if you can, link back to me.  

I'm a newbie to the 3d modeling scene….  The worstest, I might add.  

Yet Another Desiccant Box - Holds 250G Dry Desiccant - Sliding Lid with Screw Hole

DesiccantBoxBodyV5.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

worstestnongineer

IIIDMax Box Hole Cover

TP-Link Tapo C110 Camera LCD Mount for BambuLab P1S/P

Yet Another Desiccant Box - Holds 250G Dry Desiccant - Sliding Lid with Screw Hole