I love PCB and cable mounting clips, but you have to buy in bulk for them to be reasonable and even then they cost too much.  Time to print them instead!

STEP files are provided for remixing, but you can let me know what height/diameters you want to see in the comments and I'll try to get some out to add to the collection.

Standard mount bases are sized for either 5.2-5.5mm holes in 1.4-1.8mm plates/PCBs, or ~8mm holes drilled in solid material like wood.

PCB and Cable Standoffs and Mounts

PCB Stand A5.4-B4.2-H11mm.step

Cbl Grip Fir 8mm ID20mm.step

Cbl Grip Fir 8mm ID20mm.3mf

Cbl Grip Fir 8mm ID16mm.3mf

Cbl Grip Fir 8mm ID16mm.step

Cbl Grip Fir 8mm ID12mm.3mf

Cbl Grip Fir 8mm ID12mm.step

Cbl Grip Fir 8mm ID9mm.3mf

Cbl Grip Fir 8mm ID9mm.step

I needed to fit a lot of small tools into 42mm low profile drawers and couldn't find much that would fit, so I started this series.  These are all the final versions I'm using now, but I'll add more tool compartments as I make them.

Common features include: 
-42mm max height of stored tools to fit in very low drawers
-Tilt-access for easier grabbing: palm above the tool, poke the far end with a fingertip to pop it up into your palm
-Tileable designs: storage for larger tools like full screwdrivers and nippers are tileable so you can add more storage without wasted space in between tools.

Current models:
- 2x Mini Driver: 1x4 box with two rounded compartments with fingertip cutouts and tilt access pockets for easier tool removal
- 6x Tweezer Box: 1x3 box with slots for up to 6 tweezers or small, flat tools. Includes tilt access for easier tool removal.
- Tilt Box: 1x4 box for larger tools like shop knives. Includes tilt access for easier tool removal.
- Driver Tray: 1x5 tileable tray that stores 1 full size screwdriver per part plus half driver cutouts to either side, allowing for 2 more stored drivers for every extra tray part you print.
- Nipper Storage: 2x4 tileable storage for nippers, pliers, and other small such tools.  Holds 3+ per print and tiles in one axis to add 4 more tools per part printed.
- Nipper Single Section: 2x1 tileable nipper/plier storage as above.  Tile in single section lengths as needed.
- Nipper Ends: both 2x1 and 2x2 end sections with storage bins in the unusable sections.

*NEW*
- 3x Marker Box: Stores 3 small drivers, markers, or thicc pens, tilt access
- 4x Pen Box: Stores 4 small pens, tilt access
- 36x Mini Driver Bit Box: Low profile and extremely dense mini bit storage for 36 bits.  Includes tilting row mechanism that helps get your fat fingers on the tiny bits by tilting neighboring rows down while raising up the row you're trying to reach.  Print disassembled and assemble upside-down.  Disassembly hole included in base to poke things back apart.

Gridfinity Low Profile Compact Tool Storage Drawer Organizer Set

Gridfinity 1x4 2x Mini Driver Box v2.step

Gridfinity 2x4 Nipper Tray v3.step

Gridfinity 1x5 Driver Tray.stl

Gridfinity 2x2 Nipper End.stl

Gridfinity 2x1 Nipper End.stl

Gridfinity 2x1 Nipper Single.stl

Gridfinity 2x4 Nipper Tray v3.stl

Gridfinity 1x4 3x Marker Box.stl

Gridfinity 1x4 3x Marker Box.step

Gridfinity 1x4 4x Pen Box.stl

Gridfinity 1x4 4x Pen Box.step

Gridfinity 1x1 Mini Bit Box v4 - Print Bed.stl

Gridfinity 1x1 Mini Bit Box v4 - Assembly.step

I needed an adapter to fit 2.5" SSDs into 3.5" HDD bays and all I could find were ones that expected me to screw the drives in.  I have a 3D printer, why would I do that?  Here's the design I settled on when I got tired of iterating.  

Print two and snap them onto either side of the small drive with the I/O ports on the end as seen in the example photo.  You may want to snip off one or both of the bumps on the rounded tabs, depending on your SSD design.  

This design expects you to be installing this in a screwless drive bay, so you might need to reduce the hold diameter if you intend to screw it in somewhere.  The STEP file is provided for this.  Please link a remix if you make one.

2.5" to 3.5" HDD/SSD Screwless Adapter

2.5-to_3.5_HDD-SSD_Adapter_RevB.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

gadam

PCB and Cable Standoffs and Mounts

Gridfinity Low Profile Compact Tool Storage Drawer Organizer Set

2.5" to 3.5" HDD/SSD Screwless Adapter