Designed by us, 3D printed by you.

This is ABSTRACT, a desk tray.

Measures:
(L)20 cm x (W)20 cm x (H)2 cm

Recommended settings:
*The use of a ‘‘brim’’ is recommended for a better first layer adhesion.* 

Layer Height: 0.2
Loop Walls: 4
Top Shell: 4
Bottom Shell: 4
Infill: 12% Gyroid

PLEASE NOTE: The STL attached to this post may NOT be sold, listed for Free, redistributed, posted to other platforms or given away in any manner.

All the digital products offered on Patreon are protected by intellectual property rights and are the sole property of elleSTVDIO.

Any shop(s) or person(s) who break these terms of agreement will be held legally accountable.

COMMERCIAL LICENSE.
As an active subscriber, you can sell the physical 3D prints of elleSTVDIO designs as long as you will maintain your subscription. Your license will end at the time your Thangs subscription expires, resulting in your inability to keep selling any of elleSTVDIO products.



Abstract, desk tray catchall

Abstract.stl

Designed by us, 3D printed by you.

This is AVIATOR, a sunglasses case.

Measures:
(L)7 cm x (W)3,5 cm x (H)17 cm

Recommended settings:

Layer Height: 0.16/0.2
Loop Walls: 3
Top Shell: 3
Bottom Shell: 3
Infill: 10% Gyroid

Aviator, glasses case.

Case.stl

DIGITAL DOWNLOAD. (STL./STEP.)
Designed by us, 3D printed by you.

This is TUMBLER, a candle holder.

Measures:
(L)8 cm x (W)8 cm x (H)6 cm

Recommended settings:

Layer Height: 0.2/0.28
Loop Walls: 2/3
Top Shell: 3
Bottom Shell: 3
Infill: 10% Gyroid

Tumbler, cande holder.

Tumbler.stl

Designed by us, 3D printed by **you**.

As a new member you unlock **instant access** to the entire elleSTVDIO library.

As an **active** subscriber, you can sell the physical 3D prints of my designs  as long as you will maintain your subscription. 

**Active** subscribers get free access to every new design released to the elleSTVDIO catalog each month.

The license It does not permit the sale or the redistribution of any of elleSTVDIO digital files.

All the digital products offered on Thangs3D are protected by intellectual property rights and are the sole property of elleSTVDIO.

By signing up to the elleSTVDIO $10/month plan, you acknowledge and agree to all terms stated above. Any shop(s) or person(s) who break these terms of agreement will be held legally accountable.




Instant Access.

Designed by us, 3D printed by you.

This is MAGNECTUS COLLECTION, fridge magnets.

Measures:
(L)2,5 cm x (W)2,5 cm x (H)5 cm
Magnets used (10mm x 3mm): https://a.co/d/9LE7yTt

Recommended settings:
Layer Height: 0.2 Loop Walls: 3 Top Shell: 2 Bottom Shell: 2 Infill: 10% Gyroid

**License:**
As an active subscriber, you can sell the physical 3D prints of elleSTVDIO designs as long as you will maintain your subscription. Your license will end at the time your Thangs subscription expires, resulting in your inability to keep selling any of elleSTVDIO products.

All the digital products offered on Thangs are protected by intellectual property rights and are the sole property of elleSTVDIO.

By signing up to the elleSTVDIO $10/month plan, you acknowledge and agree to all terms stated above. Any shop(s) or person(s) who break these terms of agreement will be held legally accountable.

Magnectus collection, fridge magnets.

Magnectus collection.stp

Magnectus collection.stl

Designed by us, 3D printed by you.

This is CHESSACTUS, a chess set.

Measures:
(L)22 cm x (W)22 cm x (H)4 cm

Recommended settings:

*If you don’t own a multi-color 3D printer I have included inside the files folders a different version of the chess board, where you can print the lid and the chess board separately.*

Layer Height: 0.2 
Loop Walls: 3 
Top Shell: 4 
Bottom Shell: 2 
Infill: 8% Gyroid




Chessactus, chess set.

Base.stl

Base.stp

Chess board.stl

Chess board.stp

Chess set.stl

Chess set.stp

Chess board tiles.stl

Chess board split .stl

Designed by us, 3D printed by you.

This is TULIP, a napkin holder.

Measures:

When close:
(L)7 cm x (W)7 cm x (H)7 cm
When open:
(L)7 cm x (W)7 cm x (H)22 cm

Recommended settings:
*Make sure to level your buildplate correctly to avoid fusing together the moving parts.*

Layer Height: 0.2 
Loop Walls: 2 
Top Shell: 2 
Bottom Shell: 2 
Infill: 5% Gyroid


Tulip, napkin holder.

Tulip.stp

Tulip.stl

Designed by us, 3D printed by you.

This is BAMBOOKS, a set of bookends with bookmarks.

Measures:
(L)10 cm x (W)10 cm x (H)22 cm

Recommended settings: 
Layer Height: 0.2
Loop Walls: 3
Top Shell: 5 Bottom Shell: 5 Infill: 10% Gyroid

Bambooks, bookends with bookmarks.

Bookmarks.stl

Bookends.stl

Bookends.stp

Bookmarks.stp

Ciao! My name is Luca, I'm a product designer born and raised in Italy.

I have always been fascinated about the magical world of 3D printing and I love to think that an object designed in Italy, can be 3D printed in another country in a few hours, as many time as you want and without any waste.

I wanted to concentrate my efforts designing home products with a minimal yet elegant character, such as table lamps, incense burners, candle holders and much more.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

elle STVDIO

Pinned models