This sleek little wall planter not only served as the perfect complement for some added green in our kitchen, but it was cheap to make, easy to print and it's super-sturdy. Buy, print and put 'em everywhere.

Printable without supports, the planter features built-in water collection to prevent over-watering. Ample tolerance between the pot and the wall mount allows the pot to be easily removed so excess water may be drained from the reservoir. We have been using this design for over a year and love it.

**Notes**
PETG recommended for its longevity, strength and water resistance. No supports required, by may help with the reservoir holes in the bottom of the pot. Print the wall bracket upside down.

Wall Planter

Wall Planter - Pot.stl


After switching away from coffee our home needed a solution to manage tea strainers between steepings and this handy little thingamabob did the trick.

This is a wall-mountable tea strainer holder with a removable drip tray that will allow your strainers or reusable bags to dry out quickly and evenly. Simply download, print, mount and make some tea. Hand wash recommended.

**Printing Notes:**
Best printed on its back with at least 3 walls for strength. The drip tray will require a small support for the handle. PLA will work, but PETG's superior longevity and heat tolerance is better suited for this product.

Tea Strainer Wall Mount

Tea Strainer Wall Mount - Body.stl

After the success of our original [Bathroom Organizer](https://thangs.com/designer/Svenio/3d-model/Bathroom%20Organizer-119874), it was time to improve on the design. This upgraded version includes support for nail clippers, tweezers, Q-Tips and ventilation at the rear of the toothbrush compartments to help with moisture evaporation. This is the best and final version of this product, we use it every day in our home!

**Notes**
- Choose from left or right oriented versions.
- Best printed upside down with supports for the shaver mounts. PLA will work fine, but PETG will last longer. 3 or more walls recommended for water resistance, 10-15% infill should suffice.

Ultimate Bathroom Organizer

UBO - Left Orientation.stl

After falling victim to Costco's latest sale, I found that our new massage gun had no wall mount. WUT!? So I made one. It's pretty cool. It hides the screws! And it doesn't suck.

**PRINT NOTES**
A medium difficulty print requiring supports. As per usual, I used PETG for its strength. Make sure to print with some extra walls to withstand the forces from the French Cleat.

**ASSEMBLY**
Read all steps _BEFORE_ installing.

1. Print the Mount and the French Cleat.
2. Affix the French Cleat on a vertical surface with screws into a stud (recommended).
3. Slide the Mount over the French Cleat and secure to the French Cleat with a large screw from underneath. This will pull the Mount downward and wedge it against the wall and the Cleat.
4. Insert the Massage Gun into the mount and then hot-glue the charging cable in place from underneath. (It is also possible to do this step before installation).

Sharper Image Massage Gun Wall Mount

Sharper Image Massage Gun Wall Mount (v2) - Mount.stl

Having decided not to spend the money on an overpriced bucket for my coffee grinds, I threw together this design and haven't regretted it one bit.
**NOTES**
The model is super-strong and printable without supports. I recommend printing in something like PETG (PLA is NOT recommended), and as slow and hot as you can go. 0.16mm layer height recommended, but 0.2mm works well.

Espresso Knockbox

Having decided not to spend the money on an overpriced bucket for my coffee grinds, I threw together this design and haven't regretted it one bit.
The model is super-strong and printable without supports. I recommend printing in something like PETG (PLA is NOT recommended), and as slow and hot as you can go. 0.16mm layer height recommended, but 0.2mm works well.

Just a simple mantle hook for hanging stockings that I designed shortly before Christmas. Tested with up to 25lbs of weight. Easy print, no supports; I used PETG, 3 walls and 30% infill. Enjoy!

Stocking Hook

After noticing the gradual decline of my much-beloved Android tablet I decided that the world of SBCs, 3D printing and all-the-things has progressed enough to warrant making my own. I figured... why bother paying for the convenience, power and elegance of a new tablet when I can enjoy many days of anguish, frustration and failure? Well, after nearly 4 months of questionable decision-making and getting high on soldering fumes, I present to you the fastest DIY tablet to date: the sexiest, most elegant 7" car-phone-sized brick based on the ODROID N2+. With up to 8+ hours of __**gaming**__ battery life, this thing is the powerhouse of DIY tablets (since most are based on the RPi). It's got almost everything you want in a tablet... like, a screen! And much less. Here's all the juicy stuff if you want to make your own, I use mine every day and love it.

**BOM**

- [ODROID N2+](https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2/).
- [ODROID-VU7A Plus](https://www.hardkernel.com/shop/odroid-vu7a-plus-7inch-hdmi-display-with-multi-touch-and-audio-capability/).
- A compatible eMMC card for Android. [Example](https://www.hardkernel.com/shop/64gb-emmc-module-n2-android/).
- An [eMMC-to-USB adapter](https://www.hardkernel.com/shop/usb3-0-emmc-module-writer/) for installing Android.
- Some kind of large, 12v battery solution. I used [this one](https://www.amazon.ca/gp/product/B00ME3ZH7C/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1).
- A [power button](https://www.adafruit.com/product/1400).
- 2 x HDMI [connectors](https://www.adafruit.com/product/3549) & 1 x [cable](https://www.adafruit.com/product/3561).
- [Some kind of USB solution](https://www.pishop.ca/product/usb-adaptor-kit/) for hooking up the touchscreen.
- Hot glue, M3 screws, etc.

**NOTES:**

In the 2022 world of ARM-based SBCs the [ODROID N2+ is a powerhouse](https://dietpi.com/survey/#benchmark) of a machine. Running on 12v, the mainboard of this tablet eats battery like nobody's business, but in exchange it is very fast and runs almost anything. This means it also gets warm, so to address the heat issue without resorting to a fan, I exposed the heatsink out of the rear of the tablet. This works very well, but can get uncomfortable after extended hours of use. This is the trade-off I make for a fully hackable, Open Source tablet that can grow with my needs over the years to come. If you choose to make one, then feel free to message me.

As for printing, this is a mildly complex print requiring supports. For settings, I used 20% infill with 2 extra walls and PETG for its greater heat tolerance and strength than PLA. 

**Tinkercad:** https://www.tinkercad.com/things/kckWfklVucB

7" Tablet (Odroid N2+)

Front Cover.stl

**UPDATE:** Check out the [latest version of this product](https://thangs.com/designer/Svenio/3d-model/Ultimate%20Bathroom%20Organizer-1061306) that includes support for tweezers, nail clippers and more!

This bathroom organizer totally saved my sanity. It'll save yours too. You need it.

**Notes:**
Both left and right oriented models available. Best printed upside down using PETG with 2 extra walls for water resistance and supports for the shaver mounts. 10% infill.

Bathroom Organizer (Old Version)

This toothbrush holder totally saved my sanity in the bathroom and my life. It'll save yours too. You need it.

**NOTES:**

Another easy print. I used PETG with 2 extra walls for water resistance and supports for the razer mounts. 10% infill. Print in whatever orientation best suites your setup.

Toothbrush Holder

Bathroom Organizer - Right Orientation.stl

A quick-and-dirty wall mount for my ninja sword. Aside from wanting it to be strong, I also wanted it mostly hidden when looking at it. Admittedly, it could be a little slimmer, but it does the job.

**NOTES:**

Easy print. No supports if printed on its side. I used PETG for its longevity and strength. 

Sword Wall Mount

It's Christmas... and all your neighbours have super-fancy, perfectly mounted Christmas lights while yours look sad, saggy and like they were hung by drunk elf. Well, after definitely _not_ having this problem at home, I decided to design my own light clip that's way better than what they sell at the hardware store. After that, I printed it, put it in deep freeze for 24hrs and then took it out and smashed it with a hammer. It didn't break. So I printed 30 of them and put them on my house.

Subtle. Sexy. Indestructible. Just the way I like it.

**NOTES:**

Super-easy print. Best printed on its side. Use PETG, ABS or something that'll last outdoors. I printed with 100% infill, minimal fan speed for strong layer bonds and no supports.

Christmas Light Clip

Few things in life beat the pure joy of sitting down with your favourite drink to binge a few episodes of whatever-it-is, only to realize that the remote is sitting right next to the TV. Nevermind the fact that remotes were invented to maximize the laziness of humanity and should never _**EVER**_ be the reason we should have to get up and walk across the room... all good remotes deserve a home. 

So I made one. 

Designed specifically to enable maximum laziness through angled installation, this super-sophisticated wall mounted NVidia Shield remote holder will be the best thing you print. Ever.

Just don't mount it out of reach.

**NOTES:**

Super easy print, with no supports needed. Print in whatever material you like, I used 15% infill with a couple extra walls. The screws holes fit standard drywall screws.

NVidia Shield Remote (2019) Holder

Few things in life beat the pure joy of sitting down with your favourite drink to binge a few episodes of whatever-it-is, only to realize that the remote is sitting right next to the TV. Nevermind the fact that they were invented to maximize the laziness of humanity and should never EVER be the reason we should have to get up... all good remotes deserve a home. 

So I made one. 

Designed specifically to facilitate maximum laziness through angled installation, this super-sophisticated wall mounted NVidia Shield remote holder will be the best thing you print. Ever.

**NOTES:**

Super easy print, with no supports needed. Print in whatever material you like, I used 15% infill with a couple extra walls.

Admit it. We've all been there...

That moment while walking your dog and you just HAVE to check that notification while walking down the street. So you whip out your phone and fumble with the leash while your dog jerks you around, auto-correct messes everything up, you get flattened by a bus while arguing with Siri and your dog gets loose to unleash a torrent of carnage on the region's small, defenseless woodland creatures.

If only there was SOME WAY conscientious dog owners like you and me could check our phones without the constant mayhem, disaster and death. 

Well...

Introducing the Flexi Leash Holster!

Designed to fit the Flexi brand retractable leash, this holster allows for safe, convenient, two-handed smartphone operation with your favourite carnivorous compadre secured at your side. Finally! The insanity can end and we can all completely ignore our dogs to look down at our phones during our special time together in the great outdoors. 

Truly, what a golden age!

**NOTES:**

After realizing I had a legitimate need to access my phone while walking the dog, I threw together this holster in Tinkercad to ensure that I can keep my dog close and secure. For printing, I used PETG, 2 extra walls and 15% infill. Print in whatever orientation best suits your slicer/printer. Screw holes are M3. 

Flexi Leash Holster

Holster.stl

UBO - Right Orientation.stl

Tea Strainer Wall Mount - Tray.stl

Wall Planter - Bottom.stl

Wall Planter - Mount.stl

A Canadian technologist, IoT dev and 3D print enthusiast who makes useful things and then laughs when he fails at stuff. I hope you enjoy these practical solutions to everyday problems as much as I enjoy making them!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Svenio

Pinned models

Ultimate Bathroom Organizer

Tea Strainer Wall Mount

Wall Planter

Wall Planter

Tea Strainer Wall Mount

Ultimate Bathroom Organizer

Sharper Image Massage Gun Wall Mount

Espresso Knockbox

Stocking Hook

7" Tablet (Odroid N2+)

Bathroom Organizer (Old Version)

Sword Wall Mount

Christmas Light Clip

NVidia Shield Remote (2019) Holder

Flexi Leash Holster