This desk plant pot looks awesome on a desk, it makes the plant feel like it is part of your work station.  It is designed for an 80mm hole (it is 79mm) so scale accordingly for different sized holes.

--Profitability Breakdown ($12/hr) --

3D Printed Plant pots sell for around $15-20 on Etsy and seem to sell very well. This model costs about $1.50 and takes about 1hr 30 min to print. There's nothing like this out there right now so It could command more $ if photographed well.

--Printing Tips--

- Print Flat on top face, no supports needed

Desk Plant Pot

Desk Plant Pot (1).stl

This under-desk controller holder is perfect for storing your controller conspicuously.  It is meant for a PlayStation Controllers.

There is a version that has screw holes and a version without (for handling with command strips)

--Profitability Breakdown ($18/hr) --

These sell for around $9-15 on Amazon and Etsy and sell very well. This model costs about $0.30 and takes about 30 min to print. You can load a build plate with a ton of these and expect good returns!

--Printing Tips--

- Stand up on the edge so no supports are needed

Controller Mount - Under Desk for Playstation and Xbox 360

XBOX360 Desk Mounted.stl

This Desk Drawer is great for storing small items, or locking your phone away to stay focused. There are two pieces, the drawer, and the mount. You can secure it to the desk with command strips, but there are also screw holes.

If you want to be able to fit the largest iPhones, you'll need to scale it up in length to about 160%

--Printing Tips--

- Stand both parts up on their edge. Place the front of the drawer face down on the build plate. No supports will be needed if printed this way. Use Rafts if you have any issues with adhesion, especially for bed-slinger style printers.

Desk Drawer

Drawer Mount (1).stl

This little trashcan is perfect for keeping your desk clean and tidy. Use it with a dog poop bag, or print the version without the hole in the bottom.

IMPORTANT: This is sized for a 80mm hole. If you find this does not fit your desk, please send me a message and I will design more sizes.

--Printing--

- Can: Print with normal settings

- Grommet: Use supports

-Aperature Trash Lid:

[Assembly Guide](https://www.loom.com/share/30b459302c4246b2b7a62e09e2161b24?sid=48114f73-c45f-406e-a7aa-025aac6bbe54)

--- Aperature Blade: Orient the flat edge so that the driver peg and base slot touch on the build plate. Print with normal settings

--Aperature Driver: Print with normal settings

---Aperature Base: Use supports; there should not be support for the driver retention stands. The supports should be located at the grommet lid interface.

Cable Port Trash Can - For Desk

Trash Can - Closed Bottom.stl

These Leaf Texture plant pots are a great statement piece without standing out too much. Feel free to scale to whatever size is needed. There are two files. One model that should be printed in vase mode, and another that has drainage holes that can be printed normally.

**--Warning--**

These files are quite large due to the detail created from the leaf texture.

**--Printing--
**
There are two model types. The one with drainage holes can be printed normally. For the Vase mode one, follow these instructions

- Print in vase mode

- increase wall thickness to 0.6 or more for more rigidity

Leaf Plant Pot

Plant Pot (Vase Mode).stl

The cheesiest of phone stands. This Cheese Phone Stand is compatible with most smartphones and is surprisingly very stable. Phones can be displayed vertical or sideways. If you find the gap to be too big or small for your phone, scale the STL appropriately in your slicer software.

No supports required. For higher detail print at 0.1mm layer height. I used 15% infill for this print and it turned out great.

Cheese Phone Stand

Cheese Phone Stand.stl

This Cheese coaster is sure to add some cheesiness to your space.

The Coaster is the size of a standard coaster, about 4 inches. Print it flat with good bed leveling and it should turn out great. 

Cheese Coaster

Cheese Coaster.stl

These Cheese Keycaps are compatible with MX Stems for mechanical keyboards

There are two files, one with supports and one without. The one with supports is recommended, or the stem will not print correctly. Printing with 0.08mm layer height is recommended, and good bed adhesion is very important.

Cheese Keycap

Cheese Keycap - Built in Support.stl

**↓**  Unlimited Model Downloads per month
**$**  Commercial License
**√**  Exclusive Discord Channel

Super Seller

**↓**  20 Model downloads per month
**$**  Commercial License

Personal

Designing 3D printable games, decor, profitable prints & more!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ForgeCore