Rugged soldering iron case with additional internal containers with covers.

Holes for threaded inserts are slightly smaller and inserts fit tight and should be screwed with base without tap just by hand.

Two internal lids are needed:
-1198-4  -2x

Link for soldering iron:
https://pl.aliexpress.com/item/1005005610255110.html?spm=a2g0o.order_list.order_list_main.17.27cf1c24YaOiJG&gatewayAdapt=glo2pol

Fasteners: 
-3x M3x20mm Socket Head Screw
-1x M3x30mm Socket Head Screw
-4x M3 Nylock nut ( or normal )
-4x M3 washer.

Material:
PLA, PETG, ABS, etc.
Layer high:
0,3 or lower
Supports needed - in base for latch.

Rugged soldering iron case

1198-1-Base.stl

1198-2-Lid.stl

1198-3-Latch.stl

1198-4-Inside lid.stl

Kitchen utensil basket
 

Material: PLA, PET-G, etc
Layer high: 0,3 or lower
No supports needed

Kitchen utensil basket

1187-000-1-Box.stl

1187-000-2-Base.stl

This is model of soldering iron press for threaded inserts.
For this stand I used an old 2 pc 8x370mm rods from my printer( rods have groves so were useless in 3d printer) and 2x LMU08 bearings.
Parts were printed in Bambu Lab PET-G Basic Blue filament.

Threads M4 in base and end cap was tapped in the material.
In slider I used a M4 threaded inserts. Tap is to long to make the thread inside this hole. 

Used items:
8x370mm steel rods from printer-2pc
LMU08 berings -2pc
Tension spring 30mm long- 2pc


Fasteners used:
Screws:
M3x25mm Socket Head Screw- 2pc
M4x8mm Socket Head Screw- 6pc
M4x25mm Socket Head Screw- 2pc
Nuts:
M3 Nylock Nut- 2pc
M4 Nylock Nut- 5pc
Washers:
M3 washer- 4pc
M4 washer- 8pc
Inserts:
M4x8mm threaded insterts- 2pc

Material:
PLA, PET-G, ABS, etc.

Layer High:
0,3 or lower ( 0,2 will be good)

Support needed under rib in slider.

Soldering Iron Press for Threaded Inserts

1197-000-1-Base.stl

1197-000-3-Slider.stl

1197-000-4-Bearing Cover.stl

1197-000-5-Clamp.stl

1197-000-6-End Cap.stl

1197-000-7-C-Clamp.stl

1197-000-8-Handle.stl

1197-000-9-Link.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

DGA