MANDO | paper towel roll holder
Store your kitchen paper towel roll in style with this elegant wicker roll holder.
Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)
It comes in 2 sizes: a tall one (height 250mm), and one shorter (height 215mm) that can be printed on PRUSA printers.
Happy printing!
DIMENSIONS (Large) | Ø 142 mm x H 250 mm DIMENSIONS (Small) | Ø 142 mm x H 215 mm
PRINTING | ~5h
V2 UPDATE: This new version has a slightly thicker weave of 0.5mm, instead of the original 0.4mm weave that appeared as empty layers in some slicers. Also, I made the frame a little bigger/stronger, which should give a cleaner print.
3D PRINT SETTINGS The roll holder prints upright without supports or brim. The STL file is all already oriented properly.
Resolution: 0.3mm/layer Wall line count: 2 Build adhesion type: None Supports: None Infill: 20~30%