.jpg&w=3840&q=75)
.png&w=3840&q=75)
The Keg Stash Container, is a simple 2-piece container that can be used as a piggy bank or a stash container. This is a fairly quick, support-free print that has a few options:
Lid:
- Piggy Bank Style: Has a coin slot
- Stash Container Style: Looks like a normal keg top, no coin slot.
Container:
- Blank: Nothing embossed on the outside
- Beer Fund embossed on the outside
Dimensions: 115 mm Tall x 75 mm Diameter
Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, threads may have issues if scaled down too much. Supports: None Infill/Perimeters: 10% infill + 2 perimeters Nozzle Size: 0.4 Layer Height: 0.2
Printing & Assembly: "No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need:
- 1 x container - Choose between blank or embossed
- 1 x lid - Choose between coin slot or no coin slot
Assembly:
- Lid threads onto the container.
Category:
24 Likes86 DownloadsMay 19, 2023