This is an older model of mine, but still fun! Do you find yourself feeling empty and sad when you rest your cigarette in a boring, regular, old ashtray? Well look no further, my skull loving friend! I have the solution for you! Finally, you can fill a skull with ash and pretend it is the head of your annoying neighbor, or negative boss!
Don't forget to name your new ashtray! (I don't smoke, but I named mine Emil. This is also the reason that I made a 3d printed cigarette for the photos. It is a simple little design, but if you want it, I will upload it for free just in case.)

In all seriousness, I designed this in a few different versions (bowl, planter, ashtray and a whole head statue.) So, check out my page to see the others if you are interested!

When you download this, you also get a version without the eyeball, so you have some options!

This model can be printed without supports! Hooray!

Skull bowl (two versions):
https://cults3d.com/en/3d-model/art/two-designs-skull-bowl-with-eye-skull-bowl-no-supports-candy-dish-halloween-decoration

PLEASE READ:
This upload (like all Pretzel Prints uploads and designs) is under copyright, and upon purchase, you do not have the right to sell prints commercially. The digital files are NEVER to be re-sold, shared, or given away!

If you are interested in selling this model commercially check out my Patreon! https://www.patreon.com/user?u=25054604

Thank you for your support and honesty!

3D PRINTING SETTINGS
The one pictured was printed using Fila Cube Ivory Pla
.15mm layer height
5% infill
NO SUPPORTS

Skull Ash Tray By Pretzel Prints

Skull_Ash_tray_Final_update_2023.stl

I needed a cigarette to go with a skull ashtray that I made...but I don't smoke so I made this little guy. I put a rim on the end to make it easy to paint and differentiate where the orange filter part goes. The end is meant to look like it has already been lit and started burning.

Link to ashtray here:

https://cults3d.com/en/3d-model/home/skull-ash-tray-with-eyeball-halloween-themed-creepy-skull-smoking-accessories-no-supports

PLEASE READ:
This upload (like all Pretzel Prints uploads and designs) is under copyright, and upon purchase, you do not have the right to sell prints commercially. The digital files are NEVER to be re-sold, shared, or given away!

Thank you for your support and honesty!

3D PRINTING SETTINGS
The one pictured was printed using white Hatchbox PLA
.20mm layer height
3% infill
NO SUPPORTS

Costume cigarette

The model that hilariously became an icon. It is lovingly referred to as 'sharp' cheddar. 
I designed this within 12 hours for Cheezy Chain for @CheezyChainz (go find him on tiktok and instagram!) as a thank you for ordering from my website to support me. He is a wonderful creator and person.

I ended up really liking the design when it was finished, and I am now finding reasons to wear a cheese necklace! They fall similar to chunky Mardi Gras beads and are so much fun.

I am keeping this free because it is a fun and silly little design that I whipped together in an evening, but I do ask that you go follow CheezyChainz and send him some love if you download this design.

PLEASE READ:
This model (like all Pretzel Prints designs) is under copyright, and upon purchase, you do not have the right to sell prints commercially. The digital files are NEVER to be re-sold, shared, or given away!

If you are interested in selling this model commercially check out my Patreon! https://www.patreon.com/user?u=25054604

Thank you for your support and honesty!

Cheezy Chainz for Cheezy Chainz

The Grim Monarch's Crown of Fate Dice Tower is a double-sided skull dice tower with 4 possible exits. There are a couple versions of this design. This version has funnel in the top of the head that helps direct the dice for an easy throw; this is where the dice enter the skull.

This version will not require support when you print the skull and crown separately.

This design is exclusively going to be available through Thangs and my Patreon.

I suggest printing this model at
.15mm layer height
10% infill
2 walls

PLEASE READ:
This upload (like all Pretzel Prints uploads and designs) is under copyright, and upon purchase, you do not have the right to sell prints commercially. The digital files are NEVER to be re-sold, shared, or given away!

If you are interested in selling this model commercially check out my Patreon! https://www.patreon.com/user?u=25054604

Thank you for your support and honesty!

Grim Monarch's Crown of Fate Dice Tower V2 By Pretzel Prints

King_Dice_Tower_BOTH_PretzelPrints_V2.stl

The Grim Monarch's Crown of Fate Dice Tower is a double-sided skull dice tower with 4 possible exits. There are a couple versions of this design. This version has a hole in the top of the head that exposes a small area of brains; this is where the dice enter the skull. 

This version will require a touch of support on the brains. I have included two .3mf files/ one is painted and the other is painted and supported. This gives you some options to play with. 

This design is exclusively going to be available through Thangs and my Patreon. 

I suggest printing this model at 
.15mm layer height
10% infill
2 walls


PLEASE READ:
This upload (like all Pretzel Prints uploads and designs) is under copyright, and upon purchase, you do not have the right to sell prints commercially. The digital files are NEVER to be re-sold, shared, or given away!

If you are interested in selling this model commercially check out my Patreon! https://www.patreon.com/user?u=25054604

Thank you for your support and honesty!

Grim Monarch's Crown of Fate Dice Tower By Pretzel Prints

GrimMonarchsCrownofFate_DT_FULLMODEL_PretzelPrints.stl

GrimMonarchsCrownofFate_DT_CROWN_PretzelPrints.stl

GrimMonarchsCrownofFate_DT_SKULL_PretzelPrints.stl

GrimMonarchsCrownofFate_DT_SKULL_PretzelPrints_Painted_Supported.3mf

GrimMonarchsCrownofFate_DT_SKULL_PretzelPrints_Painted_oriented.3mf

Hello! My name is Shanna and I have been swept off my feet by the 3D printing and designing world! I am self-taught in Blender, and I started the modeling journey in August of 2022. I am learning new skills every day and pushing myself to be someone notable in this industry. I truly love doing this and wouldn't trade it for the world. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Pretzel Prints

Pinned models

Grim Monarch's Crown of Fate Dice Tower By Pretzel Prints

Skull Ash Tray By Pretzel Prints

Costume cigarette

Cheezy Chainz for Cheezy Chainz

Grim Monarch's Crown of Fate Dice Tower V2 By Pretzel Prints

Grim Monarch's Crown of Fate Dice Tower By Pretzel Prints